Reference: DWM23072206

MDS120-LB LoRaWAN Microwave Radar Distance Sensor

The MDS120-LB supports BLE configure and wireless OTA updateis more reliable for condensation / dusty environment to detect the distance between sensor and different objects.

Reference: DWM23021007

LHT65S-NE117 LoRaWAN Temperature & Humidity with TI TMP117A Sensor

The LHT65S-NE117 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor use an external probe uses TI TMP117A NIST traceability temperature sensor, with 0.1°C accuracy in normal temperature range.

Reference: DWM18051402

Brand: Semtech

HPD14A SX1278 433MHz /470MHz LoRa Wireless transceiver module

HPD14A SX1278 433MHz /470MHz LoRa Wireless transceiver module feature the LoRaTM long range modem It's from the HopeRF LoRa module.build by the semtech chipset with the application for ARM meters.

Reference: DWM22100802

AN-102D LoRaWAN smoke detector sensor node

AN-102D LoRaWAN smoke detector sensor node with high-precision, the device emits red light when it detects a fire alarm. The device sends alarm data to the platform to remind relevant personnel on the site to deal solve it.

Reference: DWM22091602

WSS-02 RS485 Connection Wind speed and direction sensor

WSS-02 is a RS485 wind speed and wind direction monitor designed for weather station solution.

Reference: DWM19090402

LPS8 Indoor LoRaWAN Gateway Build in SX1308 and SX1257 LoRa Tranceiver

The LPS8 is an open source LoRaWAN Gateway Build in SX1308  and SX1257 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.

Reference: DWM20072902

Dragino LDDS75 LoRaWAN Distance Detection Sensor node

The LDDS75 LoRaWAN Distance Detection Sensor node is a distance detection sensor that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.

Reference: DWM21010102

BCN01 BLE iBeacon designed for indoor positioning solution

BCN01 is designed for the use together with LBT1 LoRaWAN Indoor Position Solution base on  NORDIC NRF52832 IC and support Bluetooth 4.2 protocol.

Reference: DWM22091301

TrackerD an Open Source LoRaWAN Tracker based on ESP32 MCU

The TrackerD is built-in with GPS, Wi-Fi, BLE, Temperature, Humidity, Motion Detection, and Buzzer which can use Arduino IDE to customize the software for IoT solution.

Reference: DWM20072903

Dragino LDDS20 LoRaWAN Liquid Level Sensor Node

The Dragino LDDS20 is a LoRaWAN Ultrasonic liquid level sensor for Internet of Things solution. 

Reference: DWM22072101

LA66 LoRaWAN Arduino shield Board

LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.

Reference: DWM22092804

WSS-04 Rain & Snow Detect sensor for WSC1-L LoRaWAN Weather station

WSS-04 is a RS485 rain / snow detect sensor. It can monitor Rain or Snow event. RS485 interface to WSC1-L. which can detect and upload the SNOW/Rain Event to the IoT Server via wireless LoRaWAN protocol.

Reference: DWM20061503

Dragino LDS01 LoRaWAN Door Sensor Sensor Nodes

The LDS01 is a LoRaWAN Door Sensor. It detects door open/close status and will send periodically data every day as well as for each door open/close action. It also count the door open times and calculate last door open duration.

Reference: DWM18110901

Cypress PSoC 6 MCU goes LoRa by using CY8CKIT-062-BLE with Arduino Shield

Setting up a LoRa peer-2-peer communication by using CY8CKIT-062-BLE with Arduino Shield (Dragino LoRa, RFM95W).

Reference: DWM22082512

PG1302 LoRaWAN Concentrator Support Raspberry PI 3B/3B+/4

The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random channels which is fully compatible with RPi3B/3B+/4.

Reference: DWM22092801

WSS-01 Rain Gauge for WSC1-L LoRaWAN Weather station

WSS-01 RS485 Rain Gauge is a weather monitor instrument to monitor rainfall.