- On sale!

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
HopeRF DK / EVB RFduino board which is compatible with Arduino UNO R3 and Arduino IDE.
Brief introduction
1.Hoperf modules + Arduino =RFduino
2.The main board are with the controller ATMEGA328P.
3.Released the RFM6X and RFM9X series module library which are compatible with Arduino IDE
4.It's a good way to represent the technique problems to us.
Userfull Link:
HopeRF_RFDK_RFMxx_DEMO_V2.1_operation_manual
RFduino Board & LoRa module as DK board User guide
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14041802
HopeRF DK / EVB module kits with number kinds of module which will plug into the DK & EVB board.
Reference: DWM14060701
The TH02 is a digital relative humidity and temperature sensor. This monolithic CMOS IC integrates temperature and humidity sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
Reference: DWM19072202
HP203N is 24Bit Barometer sensor, employs a MEMS pressure sensor with an I2C interface to provide accurate temperature, pressure or altitude data.
Reference: DWM17042402
RFM300W 433MHz /868MHz /915MHz Transceiver RF Module is Hope RF owned brand IC which is based on the high performance Low cost CMOSTEK NextGenRFTM CMT2300 chip.
Reference: DWM21030906
Brand: Semtech
RFM69W are built-in by SX1231 which is ISM Free band MAX power output 13dBm transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
Reference: DWM17111902
HP206F is 24Bit Barometer sensor, employs a MEMS pressure sensor with an I2C interface to provide accurate temperature, pressure or altitude data.
Reference: DWM14120802
RFM83C/CL series is a low cost, high performance ASK/OOK receiver module.
Reference: DWM23013001
RFM119B is a RF module with which +20dBm high power and high performance thus to support 127 to 1020 MHz frequency, OOK, (G) FSK modulation.
Reference: DWM21030904
Brand: Semtech
RFM69HCW are built-in by SX1231H which is ISM Free band transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
Reference: DWM15011202
Brand: Semtech
The RFM68W is an ultra-low-cost, fully integrated FSK or OOK transmitter suitable for operation between 310 and 450 MHz, 860 and 870 MHz, as well as 902 and 928 MHz..The RFM68W offers integrated radio performance with cost efficiency and is suited for operation in North America FCC part 15.231, FCC part 15.247 DTS and FHSS modes, 15.249, and Europe EN 300...
Reference: DWM16050802
HM-TRP series module is one of the hopeRF data link rf module with operating at 433MHz/868MHz/915 MHz and TTL/RS232/RS485 UI is a low cost, high performance transparent FSK transceiver.
Reference: DWM18051401
Brand: Semtech
HPD13A Sx1276 868MHz /915MHz LoRa transceiver RF module feature the LoRa TM long range rf module which core chipset are the semtech serice LoRa chipset,usually build for the ARM application.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Reference: DWM22093002
CMT2300A is an ultra-low power, high performance, OOK (G) FSK RF transceiver suitable for a variety of 140 to 1020 MHz wireless applications.
Reference: DWM21031001
Brand: Semtech
The RFM95W transceivers with 868 MHz and 915 MHz feature the LoRa TM long range rf module which core chipset are the semtech Sx1276 LoRa chipset good for building the for IoT end sensor nodes.
Reference: DWM15011201
Brand: Semtech
The RFM68CW is an ultra-low-cost, FSK or OOK transmitter module suitable for operation in the 433, 868 and 915 MHz licence free ISM bands., the RFM68CW may be used without the requirement for configuration via an MCU. However, in conjunction with a microcontroller, the communication link parameters may be re-configured. Including, output power,...
Reference: DWM16050803
Brand: Semtech
HM-TRLR-Dseries are operating at 433MHz, 868MHz, 915MHz low cost, high performance transparent transceiver with LoRa/FSK/ GFSK/OOK modulation variety.It's mainly use for uav controller and drone data link.
Reference: DWM15011302
Brand: Semtech
The RFM65CW is a low cost receiver module capable of operation in 433MHz,868MHz and 915MHz license-free ISM (Industry Scientific and Medical) frequency bands. It offers the unique advantage of programmable narrow-band and wide-band communication modes.
HopeRF DK / EVB RFduino board which is compatible with Arduino UNO R3 and Arduino IDE.