Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
HP203N is 24Bit Barometer sensor, employs a MEMS pressure sensor with an I2C interface to provide accurate temperature, pressure or altitude data.
The HP203N employs a MEMS pressure sensor with an I²C interface to provide accurate temperature, pressure or altitude data. The sensor pressure and temperature outputs are digitized by a high resolution 24-bit ADC. The altitude value is calculated by a specific patented algorithm according to the pressure and temperature data. Data compensation is integrated internally to save the effort of the external host MCU system.
Easy command-based data acquisition interface and programmable interrupt control is available. Typical active supply current is 5.3 μA per measurement-second while the ADC output is filtered and decimated by 256. Pressure output can be resolved with output in fractions of a Pascal, and altitude can be resolved in 0.1meter. The HP203B is offered in a 3.6mm x3.8 mm x 1.2 mm package and specified for operation from -40°C to +85°C.
● Supply voltage1.8V to 3.6V
● Pressure rang:300mbar~1200mbar
● Operation temperature:-40 to +85℃
● Programmable events and interrupt controls
● Altitude resolution: 0.1meter
● I²C interface
● Fast conversion down to 2ms
● Standby current<0.1μA, low conversion power, 2μA at 1 sample/sec.
● Size: 3.6*3.8*1.2 mm
● Mobile altimeter / barometer
● Industrial pressure and temperature sensor system
● Adventure and sports watches
● Weather station equipment
● Indoor navigation and map assist
● Data loggers for pressure, temperature and altitude.
● Panel computer.
Reference: DWM14060701
The TH02 is a digital relative humidity and temperature sensor. This monolithic CMOS IC integrates temperature and humidity sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
Reference: DWM14070801
HopeRF DK / EVB RFduino board which is compatible with Arduino UNO R3 and Arduino IDE.
Reference: DWM14120304
DHT22 AM2302 Low cost Digital Temperature And Humidity Sensor Replace SHT11 SHT15.
Reference: DWM17080701
AM2301 DHT21 Capacitive Digital Temperature & Humidity Sensor is wired with DHT21 or AM2301 sensors.
Reference: DWM17111902
HP206F is 24Bit Barometer sensor, employs a MEMS pressure sensor with an I2C interface to provide accurate temperature, pressure or altitude data.
Reference: DWM17111904
HP303B 24Bit High Precision Digital Pressure Sensor employs a MEMS pressure sensor with an I2C interface to provide accurate temperature, pressure or altitude data.
Reference: DWM14032107
The HP203B / HP206C are 24Bit Barometer sensor, employs a MEMS pressure sensor with an I2C interface to provide accurate temperature, pressure or altitude data.
Reference: DWM18121801
SHT20+BMP280 High Precision Temperature Humidity and Barometer Sensor Module for weather station an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
Reference: DWM17111903
HP206CW 24Bit Waterproof MEMS Altimetric Pressure Module with an I2C interface to provide accurate temperature, pressure or altitude data.
Reference: DWM15081102
DWM-GY-89 is built by 10DOF LSM303D,L3GD20 ,BMP180, could be Accelerometer, Magnetometer, and Altimeter Sensor Module.
Reference: DWM19072201
HP303S is a miniaturized Digital Barometric Air Pressure Sensor with a high accuracy and a low current consumption, capable of measuring both pressure and temperature.
Reference: DWM16110101
The HP203B is 24Bit Barometer sensor, employs a MEMS pressure sensor with an I2C interface to provide accurate temperature, pressure or altitude data.
Reference: DWM17111902
HP206F is 24Bit Barometer sensor, employs a MEMS pressure sensor with an I2C interface to provide accurate temperature, pressure or altitude data.
Reference: DWM19072203
HP5806 is a miniaturized Digital Barometric Air Pressure Sensor with a high accuracy and a low current consumption, capable of measuring both pressure and temperature.
Reference: DWM20041503
M5StickC ENV Hat in-build with DHT12, BMP280 and BMM150 sensors detect the temperature, humidity, air pressure and magnetic field.
Reference: DWM15080503
DWM-GY-652 HMC5983 BMP180 MWC Electronic Compass Atmospheric Pressure Module Four-axis Flight Control Sensor.
Reference: DWM17111904
HP303B 24Bit High Precision Digital Pressure Sensor employs a MEMS pressure sensor with an I2C interface to provide accurate temperature, pressure or altitude data.
Reference: DWM17080702
BMP180 Barometer Pressure /Temperature /Altitude Sensor is a low-cost sensing solution for measuring barometric pressure and temperature and altitude.
Reference: DWM18121803
DWM-51WS3 is high precision meteorological measurement module, which support to measure wind direction, wind speed, rainfall, temperature, humidity, pressure measurement mode, secondary development output with APRS data.
HP203N is 24Bit Barometer sensor, employs a MEMS pressure sensor with an I2C interface to provide accurate temperature, pressure or altitude data.
