- New

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Reference: DWM15010504
Brand: Semtech
The RFM69CW /RFM69HCW are built in by SX1231and SX1231H which is ISM Free band transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
HT-M02 design strictly with industrial standards for the industrial environment, Integrated Linux Operating System (4.19 Kernel, Debian Stretch10).Support DC power supply and PoE power supply, support 4G(cat.1, cat.4),WiFi / Bluetooth,it is convenient for users to apply in different scenarios.
HT-M02 design strictly with industrial standards for the industrial environment, Integrated Linux Operating System (4.19 Kernel, Debian Stretch10). IP66 waterproofing, no fan or motor heat dissipation structure, ROCKCHIP Cortex-A55 quad-core 64-bit processor, 2G DDR4 RAM, 32G eMMC 5.1 ROM, support Micro TF card expansion. Support DC power supply and PoE power supply, support 4G(cat.1, cat.4),WiFi / Bluetooth,it is convenient for users to apply in different scenarios.
CPU: ROCKCHIP Quad-core Cortex-A55 64-bit 1.8GHz processor.
RAM: 2G DDR4.
ROM: 32G eMMC 5.1 (available to customize to 8/16/64/128G).
LoRa Baseband: SX1303 + SX1250 chipset,support 433 ~510MHZ,863~928MHz
Operation system: Pre-loaded with Linux (4.19.219 Kernel, aarch 64) Debian 10 operating system.
Ethernet (Default):10/100M.
Wi-Fi: IEEE 802.11 b/g/n.
LTE (Optional): Cat. 1/ Cat. 4.
PoE (Optional): IEEE802.3af
4.5~17V DC interface.
UART Header.
ETH interface.
SIM card slot.
SMA antenna socket*3(LoRa, 4G, Wi-Fi 2.4GHz)
Waterproof and dustproof: IP66.
Pre-installed Docker, makes TTS V3, ChripStack, etc. applications can be deployed effortlessly.
Heat dissipation: adopting cooling fan and the motor structure, through unique thermal conductive device transfer heat to aluminum shell, strengthen heat dissipation, commissioning more stable.
The standard mode has the basic function of LoRa and ETH connection(12V DC adapter included) , the customized functions are available to select one or more features according to your needs.
433~510 MHz:21±1dBm.
863~870 MHz:26±1dBm.
902~928 MHz:26±1dBm.
Max. Receiving sensitivity:-139dBm@SF12, 125KHz.
Size:(+40)*125*52mm.
Operating temperature:–40~85° C.
433~510 MHz: EU433
863~870 MHz: For Bands: EU868,IN865
902~928 MHz: For Bands: US915,AU915,AS923,KR920
LoRaWAN:SX1303 + SX1250 chipset
Ethernet (Default):10/100M.
Wi-Fi: IEEE 802.11 b/g/n.
LoRaWAN:SX1303 + SX1250 chipset
Ethernet (Default):10/100M.
Wi-Fi: IEEE 802.11 b/g/n.
PoE: IEEE802.3af
LoRaWAN:SX1303 + SX1250 chipset
Ethernet (Default):10/100M.
Wi-Fi: IEEE 802.11 b/g/n.
EC200U-EU: EMEA LTE Cat 1 module.
EC200U-A: North America/ Rogers/AT&T/T-Mobile LTE Cat 1 module.
EC200U-AU: Latin America, New Zeland, Taiwan LTE Cat 1 module.
EC200A-EU: EMEA LTE Cat 4 module.
EC200A-A: North America/ Rogers/AT&T/T-Mobile LTE Cat 4 module.
EC200A-AU: Latin America, New Zeland, Taiwan LTE Cat 4 module.
More info about valid bands, please see EC200 product page
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM22071401
The LPS8v2 is an open-source Debian system LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi , Ethernet and also with 4G Cellular Network capability.
Reference: DWM22071402
The LG308N is an open source Linux LoRaWAN Pico Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network.
Reference: DWM22121301
RAK7248 Raspberry Pi 4 option RAM for 2G,4G and 8G Based LoRaWAN Gateway RAK WisGate Developer D4H/D4H+/D4HP RAK7248/RAK7248P/RAK7248C.
Reference: DWM23010502
HTIT-Wsh ESP32-S3 SX1262 WIFI BLE LoRa/ LoRaWAN Wireless Shell-V3 provides Wi-Fi, BLE, and LoRa solutions, which perfectly support Arduino development environment.
Reference: DWM20111002
DWM-HTCC-1/2AA is based on ASR6502 and SX1262 support Arduino®, can run the LoRaWAN 1.0.2 protocol can easily connect batteries end sensor node.
Reference: DWM22022801
HT-M2808 HNT Miner Helium Full Hotspot is as an efficient miner for a new cryptocurrency, Helium (HNT) which can provides a WiFi configuration interface via the device's BLE services.
Reference: DWM23010504
ESP32-S3 SX1262 WIFI BLE LoRa/ LoRaWAN Wireless Stick-V3 provides Wi-Fi, BLE, and LoRa solutions, which perfectly support Arduino®。 Users can easily carry out secondary development and application.
Reference: DWM20101002
DWM-HTCC-AC01 is based on ASR6501 and SX1262 support Arduino®, can run the LoRaWAN 1.0.3 protocol can easily connect batteries and solar panels sensor node.
Reference: DWM22123004
WiFi LoRa 32 is a classic IoT dev-board designed & produced by Heltec Automation. The newly launched V3 version has the same pin sequence as the V2 version and retains Wi-Fi, BLE, LoRa, OLED display, and other functions.
Reference: DWM20101001
DWM-HTCC-AC02 is based on ASR6501 and SX1262 support Arduino®, can run the LoRaWAN 1.0.2 protocol can easily connect batteries and solar panels sensor node.
Reference: DWM22051404
LoRaWAN Helium HNT miner Indoor networking antenna available with 433MHz,868MHz and 915MHz.
Reference: DWM20101301
DWM-HT-M01 SX1308 Baseband Mini LoRaWAN gateway support both SPI and USB interface can work with Windows® (7, 8, 10 or higher) or Linux (Raspberry Pi®).
Reference: DWM23010503
ESP32-LoRa Dev Backplane Compatible with HTIT-Wsh and HT-CT62.
Reference: DWM22092703
he ATECC608B is a secure element from the Microchip CryptoAuthenticationTM portfolio with advanced Elliptic Curve Cryptography (ECC) capabilities.
Reference: DWM23010501
HT-CT62 is a Low cost WIFI LoRa/ LoRaWAN module for long range wireless communication for smart cities, smart farms, smart homes, and IoT makers. Support the Arduino development environment.
Reference: DWM20101101
DWM-HT-M00 dual-channel LoRaWAN gateway Drive SX1276 chip by ESP32 low-cost , with Type-C interface.
HT-M02 design strictly with industrial standards for the industrial environment, Integrated Linux Operating System (4.19 Kernel, Debian Stretch10).Support DC power supply and PoE power supply, support 4G(cat.1, cat.4),WiFi / Bluetooth,it is convenient for users to apply in different scenarios.