Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The LSN50v2-S31 is a LoRaWAN Temperature and Humidity Sensor for Internet of Things solution. It is used to measure the surrounding environment temperature and relative air humidity precisely, and then upload to IoT server via LoRaWAN wireless protocol.
The Dragino LSN50v2-S31 is a LoRaWAN Temperature and Humidity Sensor for Internet of Things solution. It is used to measure the surrounding environment temperature and relative air humidity precisely, and then upload to IoT server via LoRaWAN wireless protocol.
The temperature & humidity sensor used in LSN50v2-S31 is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a waterproof anti-condensation casing for long term use.
LSN50v2-S31 supports temperature and humidity alarm feature, user can get alarm for instant notice.
LSN50v2-S31 is powered by 8500mAh Li-SOCI2 battery, It is designed for long term use up to 10 years. (Real-world battery life depends on the use environment, update period. Please checkrelated Power Analyze report).
Each LSN50v2-S31 is pre-load with a set of unique keys for LoRaWAN reggistration, register these keys to local LoRaWAN server and it will auto connect after power on.
✓ LoRaWAN v1.0.3 Class A
✓ Ultra-low power consumption
✓ External 3 meters SHT31 probe
✓ Measure range -55°C ~ 125°C
✓ Temperature & Humidity alarm
✓ Bands: CN470/EU433/KR920/US915
EU868/AS923/AU915/IN865
✓ AT Commands to change parameters
✓ Uplink on periodically or Interrupt
✓ Downlink to change configure
Micro Controller:
➢ MCU: STM32L072CZT6
➢ Flash:192KB
➢ RAM:20KB
➢ EEPROM: 6KB
➢ Clock Speed: 32Mhz
Common DC Characteristics:
➢ Supply Voltage: built in 8500mAh Li-SOCI2 battery
➢ Operating Temperature: -40 ~ 85°C
Temperature Sensor:
➢ Range: -40 to + 80°C
➢ Accuracy: ±0.2 @ 0-90 °C
➢ Resolution: 0.01°C
➢ Long Term Shift: <0.03 °C/yr
Humidity Sensor:
➢ Range: 0 ~ 99.9% RH
➢ Accuracy: ± 2%RH ( 0 ~ 100%RH)
➢ Resolution: 0.01% RH
➢ Long Term Shift: <0.25 %RH/yr
➢ Frequency Range,
✓ Band 1 (HF): 862 ~ 1020 Mhz
➢ 168 dB maximum link budget.
➢ High sensitivity: down to -148 dBm.
➢ Bullet-proof front end: IIP3 = -12.5 dBm.
➢ Excellent blocking immunity.
➢ Built-in bit synchronizer for clock recovery.
➢ Preamble detection.
➢ 127 dB Dynamic Range RSSI.
➢ Automatic RF Sense and CAD with ultra-fast AFC.
➢ LoRaWAN 1.0.3 Specification
➢ Sleeping Mode: 20uA
➢ LoRaWAN Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
✓ Wireless Alarm and Security Systems
✓ Home and Building Automation
✓ Industrial Monitoring and Control
✓ Long range Irrigation Systems.
Datasheet_LSN50v2-S31_LoRaWAN_Temperature_Humidity_Sensor.pdf
Reference: DWM19090402
The LPS8 is an open source LoRaWAN Gateway Build in SX1308 and SX1257 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM20022602
The Dragino RS485-LN is a RS485 to LoRaWAN Converter. It converts the RS485 devices into LoRaWAN wireless network which simplify the IoT installation and reduce the installation/maintaining cost.
Reference: DWM21010103
The LSN50v2-D20 is a LoRaWAN Temperature Sensor for Internet of Things solution. It can be used to measure the temperature of air, liquid or object, and then upload to IoT server via LoRaWAN wireless protocol.
Reference: DWM18110502
LT-33222-L is The Dragino LT series I/O Modules are Long Range LoRa I/O Controller designed to simplify the installation of I/O monitoring.
Reference: DWM19062701
Yun Shield v1.1.6 runs Open Source OpenWrt system solve the Internet connectivity and storage issue for Arduino Board.
Reference: DWM24011201
The LDS12-NB is a NB-IoT LiDAR ToF (Time of Flight) Distance Sensor It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m) can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection,...
Reference: DWM18112902
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM22092802
WSS-03 is a RS485 Air Quality sensor. It can monitor CO2, PM2.5 and PM10 at the same time by RS485 interface to WSC1-L which can detect and upload the environment CO2, PM2.5 and PM10 to the IoT Server via wireless LoRaWAN protocol.
Reference: DWM21051606
The LTC2 Industrial LoRaWAN PT100 Temperature Transmitter Sensor Nodes base on LSN50-V2. It use to supports to read PT100 probe and convert the value to temperature and uplink to IoT server.
Reference: DWM22051403
HP0D is Outdoor LoRaWAN gateway it supports the miner feature from Helium and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot for the project.
Reference: DWM22071801
The LSN50v2-D22 is a LoRaWAN Temperature Sensor nodes with two sensor cable which are waterproof, moisture-proof and anti-rust for long-term usage . It can be used to measure the temperature of air, liquid or object.
Reference: DWM22040502
WSC1-L Dragino Weather Station solution Main Process Unit can upload these sensor data to IoT server via LoRaWAN wireless protocol.
Reference: DWM22100804
Wireless configuration tool is for the LoRaWAN sensor nodes parameter wireless setting which is t necessary for LoRaWAN sever access.
Reference: DWM23122502
TS01-NB is an outdoor NB-IOT Tilting Sensor which is specially designed for detecting the angle of trees, buildings or large scale equipment measures pitch and roll angle and converts to NB-IoT wireless data and sends to IoT platform via NB-IoT network.
Reference: DWM23072306
The DS03A-LB is an Open/Close LoRaWAN Door Sensor supports BLE configure and wireless OTA update. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
Reference: DWM21030101
LIG16 Indoor LoRaWAN Gateway Build in SX1302 and SX1250 LoRa Tranceiver this gateway with lower current consumption and higher amount of traffic than preceding devices.
Reference: DWM23122601
SDI-12-NB is a SDI-12 to NB-IoT Converter supports BLE configure and OTA update and designed for Smart Agriculture sensor and Weather Station.
Reference: DWM21051602
The LDS02 is a LoRaWAN Door Sensor. It detects door open/close status build in a sx1262 Lora chipset and 2 x AAA batteries and target for long time use.
The LSN50v2-S31 is a LoRaWAN Temperature and Humidity Sensor for Internet of Things solution. It is used to measure the surrounding environment temperature and relative air humidity precisely, and then upload to IoT server via LoRaWAN wireless protocol.
