Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Wireless configuration tool is for the LoRaWAN sensor nodes parameter wireless setting which is t necessary for LoRaWAN sever access.
Wireless configuration tool is for the LoRaWAN sensor nodes parameter wireless setting which is t necessary for LoRaWAN sever access.
AN-307 LoRaWAN Sound and alert Siren
AN-304C LoRaWAN PIR motion sensor node
AN-102D LoRaWAN smoke detector sensor node
CP210x_Windows_Drivers（for wireless configuration tool)
How to install CP210x driver for wireless configuration tool
Reference: DWM22071401
The LPS8v2 is an open-source Debian system LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi , Ethernet and also with 4G Cellular Network capability.
Reference: DWM22100801
AN-304C LoRaWAN PIR motion sensor node is a wireless infrared alarm which is based on passive infrared technology to detect a motion or occupancy.
Reference: DWM22100802
AN-102D LoRaWAN smoke detector sensor node with high-precision, the device emits red light when it detects a fire alarm. The device sends alarm data to the platform to remind relevant personnel on the site to deal solve it.
Reference: DWM23072302
The SPH01-LB LoRaWAN Soil pH Sensor supports BLE configure and wireless OTA update for IoT of Agriculture it is designed to measure the soil PH and soil temperature to analyze the soil acid or alkali level. IP68 waterproof.
Reference: DWM22092201
WSS-05 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time which can work with WSC1-L or WSC2-LB weather station main processor.
Reference: DWM25030501
The SW3L-LS is a LoRaWAN Flow Sensor. It detects water flow volume and uplinks to the IoT server via the LoRaWAN network. It can detect the water flow status and send an Alarm, to avoid waste from water usage such as a broken toilet case.
Reference: DWM23070101
D22-LB is a LoRaWAN Temperature Sensor with 2 x DS18B20 supports BLE configure and wireless OTA update.
Reference: DWM19121101
ATmega328P LoRa Radio Node is based on SX1276/SX1278 which use the Arduino pro mini 8Mhz 3.3V bootloader, usage same as the Arduino pro mini.
Reference: DWM25022101
The DDS75-NB is an NB-IoT Distance Detection Sensor that uses BC660K-GL that detect the distance between the measured object and the sensor and sends the IoT platform via the NB-IoT network.
Reference: DWM22092803
WSS-07 photosynthetically active radiation sensor is mainly used to measure the photosynthetically active radiation of natural light in the wavelength range of 400-700nm.
Reference: DWM23072205
DDS20-LB is a LoRaWAN Ultrasonic liquid level sensor supports BLE configure and wireless OTA update uses none-contact method to measure the height of liquid in a container without opening the container, and send the value via LoRaWAN network to IoT Server.
Reference: DWM18110901
Setting up a LoRa peer-2-peer communication by using CY8CKIT-062-BLE with Arduino Shield (Dragino LoRa, RFM95W).
Reference: DWM21051605
The LSPH01 LoRaWAN Soil pH Senso for IoT of Agriculture it is designed to measure the soil PH and soil temperature to analyze the soil acid or alkali level IP68 waterproof.
Reference: DWM25070201
The SE0X-LS is a Solar-Powered LoRaWAN saline-alkali soil and loamy soil Sensor. It detects Soil Moisture, Soil Temperature, and Soil Conductivity, and uploads the value via wireless to the LoRaWAN IoT Server.
Reference: DWM25020701
The RS485-NB is an RS485 / UART to NB-IoT Converter for IOT applications that can read sensor data and upload via the NB-IoT network to the IoT server supports BLE configuration and OTA update which makes it users easy to use.
Reference: DWM19011502
The OLG01-N is an Water proof outdoor setting open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
Reference: DWM24011902
The AQS01-L is an Indoor LoRaWAN Air Quality Sensor designed to measure the surrounding environment parameters, including: CO2, Temperature, Relative Air Humidity, and Air pressure, and then upload to an IoT server via the LoRaWAN wireless protocol.
Reference: DWM22071403
The GroPoint is a LoRaWAN Multi Soil Segment Converter It is designed to connect to GroPoint Profile Multi-depth Soil moisture and temperature profile Sensor for IoT of Agriculture.
Reference: DWM18110501
LG308 8 Channels Indoor LoRaWAN Pico Gateway is an open source LoRaWAN Pico Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 4G cellular.
Wireless configuration tool is for the LoRaWAN sensor nodes parameter wireless setting which is t necessary for LoRaWAN sever access.
