- On sale!

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Deluxe Kit for Arduino UNO R3 Starter Kit Wire / LED Matrix /Motion Sensor /Breadboard /LCD /Blueooth /RF /Motor /Servo /Keypad /others accessories.
The Deluxe Kit is designed to get you started quickly and easily on your path of learning electronics. It has more than 40 types of components, sensors, acuators, almost everything you need to play with.
The Deluxe Kit comes with Step by Step User Guide. Once you receive the kit you can start to play with little or no electronics and programming experience.
Features
User Guide and Code for Arduino
https://drive.google.com/folderview?id=0BzxrU4QvH7jEQVZtQkQ3bXFORmM&usp=sharing
If the link doesn't work in your place, or if you don't know how to get started, please contact us directly by email or anyway suits you. We will provide you with professional service.
Reference: DWM14041802
HopeRF DK / EVB module kits with number kinds of module which will plug into the DK & EVB board.
Reference: DWM14110206
150pcs 3mm LED Light White Yellow Red Green Blue Assorted Kit DIY LEDs Set.
Reference: DWM14121904
CooperKit DHT11 digital temperature & humidity sensor features a digital temperature & humidity sensor complex with a calibrated digital signal output. Its single-bus operation, extremely small size and low consumption enable it to be used in HVAC, automotive, weather stations, dehumidifier and other applications.
Reference: DWM15080502
DWM-DS1307is high precision Real Time Clock Module For Arduinowhich equipped with integrated TCXO and crystal.
Reference: DWM17120401
LoRa32u4 II is a light and low consumption board based on the Atmega32u4 and SX1276 868MHZ /915MHz LoRA module.
Reference: DWM19011501
The LG01-N is an open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
Reference: DWM15080503
DWM-GY-652 HMC5983 BMP180 MWC Electronic Compass Atmospheric Pressure Module Four-axis Flight Control Sensor.
Reference: DWM18021703
M5Stack 4M-PSRAM ESP32 IoT Development Board with Mpu9250 9Axies Motion Sensor extensible IoT Development Board for Arduino.
Reference: DWM18073001
LG02-P is an open source dual channels LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 4G cellular.
Reference: DWM14051501
Mega 2560 R3, Mega2560 REV3 ATmega2560-16AU Board + USB Cable compatible for arduino.
Reference: DWM17120402
LoRa32u4 RA02 is a light and low consumption board based on the Atmega32u4 and SX1278 433MHz LoRA module.
Reference: DWM15080603
DWM-MAX485 is a module TTL to RS485 Module for Arduino.
Reference: DWM18022201
Dragino LoRa IoT Development Kit is designed to facilitate beginners and developers to quickly learn LoRa and IoT technology.it will show how to build LoRa network, and how to use the network to send data from a LoRa sensor node to the cloud server.
Reference: DWM18101201
The OLG02 is an open source dual channels LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
Reference: DWM18021503
M5Stack ESP32 Basic Core Development Kit Extensible Micro Control Wifi BLE IoT Prototype Board for Arduino.
Reference: DWM19121101
ATmega328P LoRa Radio Node is based on SX1276/SX1278 which use the Arduino pro mini 8Mhz 3.3V bootloader, usage same as the Arduino pro mini.
Reference: DWM15080501
DWM-DS3231 is high precision Real Time Clock Module For Arduinowhich equipped with integrated TCXO and crystal.
Reference: DWM18021801
M5Stack PANDA ESP32 Basic Core Development Kit White Color Shell Basic Kit Extensible Micro Control Wifi BLE IoT Prototype Board for Arduino.
Deluxe Kit for Arduino UNO R3 Starter Kit Wire / LED Matrix /Motion Sensor /Breadboard /LCD /Blueooth /RF /Motor /Servo /Keypad /others accessories.