Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
DWM-DS1307is high precision Real Time Clock Module For Arduinowhich equipped with integrated TCXO and crystal.
I2C RTC DS1307 AT24C32 Real Time Clock Module for Arduino 51 AVR ARM PIC for Arduino UNO
Description:
The DS1307 I2C Real Time Clock chips (RTC)
I2C EEPROM Memory 24C32 32K
Adopt LIR2032 rechargeable lithium battery, with the charging circuit
Solved the problem of DS1307 with battery backup can not read and write.
Fully charged, can provide the DS1307 timing for 1 year .
Compact design, 27mm * 28mm * 8.4mm
Lead off clock pin of DS1307 to provide clock signal for MCU .
Can be cascaded to other I2C devices
Dimensions: 1.10 in x 1.10 in x 0.28 in (2.8 cm x 2.8 cm x 0.7 cm)
Weight: 6 g
Package Included:
1 X I2C RTC DS1307 AT24C32 Real Time Clock Module
Reference: DWM14032106
The Arduino Uno Rev3 is a microcontroller board based on the ATmega328.
Reference: DWM14080701
Arduino W5200 Ethernet Shield with Micro SD card socket and RJ45 Enthernet jack.
Reference: DWM14080703
GPRS GSM Shield for Arduino,it delivers GSM/GPRS 850/900/1800/1900MHz signals for Audio, SMS and GPRS Service.
Reference: DWM14101901
Crown YZW A123 lithium battery DIY essential 22AWG silicone wire balancing charge plug 2.54XH.
Reference: DWM18073001
LG02-P is an open source dual channels LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 4G cellular.
Reference: DWM19011501
The LG01-N is an open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
Reference: DWM15080603
DWM-MAX485 is a module TTL to RS485 Module for Arduino.
Reference: DWM18110502
LT-33222-L is The Dragino LT series I/O Modules are Long Range LoRa I/O Controller designed to simplify the installation of I/O monitoring.
Reference: DWM16061301
6mm Knob Cap Round Hole Dia for Rotary Potentiometer 40mm x 6mm,With the concave point,Brushed aluminum alloy,For arduino.
Reference: DWM18021807
M5Stack ESP32 BTC Ticker ESP32 for Arduino Micropython Open Source Bitcoin Price Ticker.
Reference: DWM17120404
0.96 OLED Display ESP32 WIFI Bluetooth SX1278 433MHz Lora IOT Development Board for Arduino Smart Home.
Reference: DWM17120402
LoRa32u4 RA02 is a light and low consumption board based on the Atmega32u4 and SX1278 433MHz LoRA module.
Reference: DWM18103005
USD74/pcs MOQ100 The OLG01 is an Water proof outdoor setting open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
Reference: DWM18022201
Dragino LoRa IoT Development Kit is designed to facilitate beginners and developers to quickly learn LoRa and IoT technology.it will show how to build LoRa network, and how to use the network to send data from a LoRa sensor node to the cloud server.
Reference: DWM14032106
The Arduino Uno Rev3 is a microcontroller board based on the ATmega328.
Reference: DWM18021801
M5Stack PANDA ESP32 Basic Core Development Kit White Color Shell Basic Kit Extensible Micro Control Wifi BLE IoT Prototype Board for Arduino.
Reference: DWM23050401
45 sensor modules In 1 Sensor Kits for Arduino Beginner Learning DIY project.
Reference: DWM20041501
M5Stack ATOM Matrix ESP32 Development Kit build with ESP32-PICO-D4 chip and MPU6886 IMU sensor.
Reference: DWM18021703
M5Stack 4M-PSRAM ESP32 IoT Development Board with Mpu9250 9Axies Motion Sensor extensible IoT Development Board for Arduino.
DWM-DS1307is high precision Real Time Clock Module For Arduinowhich equipped with integrated TCXO and crystal.
