Filter By
Categories
Categories
Disk space
Disk space
Color
Color
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 4.3kg
Price
Price
$0.00 - $3,500.00
Center frequency
Center frequency
Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
There are 951 products.
Active filters
Reference: DWM23021006
The LHT65S-E5 Temperature, Humidity & Illuminance sensor is a Long Range LoRaWAN Sensor. It includes a built-in Temperature & Humidity sensor and has an external Illuminance sensor.
Reference: DWM23021007
The LHT65S-NE117 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor use an external probe uses TI TMP117A NIST traceability temperature sensor, with 0.1°C accuracy in normal temperature range.
Reference: DWM23021008
The LHT65S Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a built-in Temperature & Humidity sensor and has an external sensor connector to connect to an external Temperature Sensor.
Reference: DWM23030701
MH-Z19E NDIR infrared gas module Built-in temperature compensation; and it has UART output and PWM output It uses the principle of non-dispersive infrared (NDIR) to detect CO2 in the air and has good selectivity. No oxygen dependence, long life, etc.
Reference: DWM22110603
Recharge PCB Kit is Li-Ion Battery Charger which can be used for LSN50v2 & RS485-BL to replace the default one time battery and connect to solar panel.
Reference: DWM23030801
DWM-N503AS radio module based TI CC1101 transceiver chip designed for 433M, 868M and 915MHz. Up to 12dBm output power and down to -116dBm sensitivity. The module supports Ardunio and WMBUS.
Reference: DWM23031201
MH-Z19 MH-Z19C IR Infrared CO2 Sensor Module Carbon Dioxide Gas Sensor NDIR for CO2 Monitor 400-5000ppm.
Reference: DWM23031202
ZH03B PM2.5 Dust Sensor Particle sensor is widely used in air quality monitoring equipment, air purifiers, ventilation systems, air conditioner, and smart home equipment.
Reference: DWM23041801
The LHT65N-E2 is a Long Range LoRaWAN Sensor nodes with Temperature & Humidity sensor which external sensor connector can be used for more than 10 years.
Reference: DWM23041802
The LHT65S-E2 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a built-in Temperature & Humidity sensor and has an external sensor connector to connect to an external Temperature Sensor.
Reference: DWM23041902
ArduPico is An Arduino-style Carrier board which compatible Raspberry Pi Pico/Pico H/Pico W/Pico WH.
Reference: DWM23050301
SR105U (UHF:400M-480MHZ) which functions have been enhanced and pinouts/commands are compatible with FRS-0W5U is an ultra-compact and high-cost performance wireless voice intercom and long-distance data transmission module.
Reference: DWM23050402
SR_T300 module is perfect for children toy walkie talkie and other short distance intercom application case. Only an external antenna, battery, speaker, microphone needed for combine a completed toy walkie talkie.
Reference: DWM23050801
SN50V3-LB is the 3rd generation of the LSN50 series generic sensor node built-in BLE support OTA upgrade private LoRa protocol for easy maintenance.
Reference: DWM23050802
PS-LB-NA convert the Analog Value to LoRaWAN wireless data and send to IoT platform via LoRaWAN gateway. supports BLE configure and wireless OTA update.
Reference: DWM23051301
SA868 is a cost-effective integrated professional walkie-talkie module which include UHF band 400~480 MHz, 320-400MHz and VHF band 134~174 MHz 3 frequency bands versions built-in high-speed microcontroller, high-performance RF transceiver chip and RF power amplifier.
Reference: DWM23051302
The LT-M9500 is air temperature and humidity, infrared CO2, and TVOC sensors are internally configured with MEMS specialized modules for measuring air temperature and humidity.
Reference: DWM23051401
The TMK-M series includes TMK01-M, TMK02-M, TMK04-M, and TMK05-M, a total of 4 models of 8-channel full-duplex digital Walkie Talkie wireless communication module development boards.
Reference: DWM23051501
TMK01-M/02-M/04-M is a multi-party call intercom module. it LoRa technology, has high receiving sensitivity, is energy-saving and environmentally friendly, and can be specially used for secondary system integration and secondary development to support all intercom functions.
Reference: DWM23051801
The DWM-E6-M is working at 640MHz~670MHz a full duplex multi-channel digital walkie talkie.which has high receiver sensitivity, low power consumption, energy saving and environmental protection, and is suitable for a variety of full duplex use scenarios.
