Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
ArduPico is An Arduino-style Carrier board which compatible Raspberry Pi Pico/Pico H/Pico W/Pico WH.
ArduPico provides a simple and efficient solution for anyone who wants to develop projects using the Raspberry Pi Pico with Arduino software and shields. With this board, users can enjoy the flexibility and power of the Raspberry Pi Pico while still using their existing Arduino tools and accessories.
It requires minimal setup, making it ideal for both beginners and experienced developers.
Raspberry Pi Pico/Pico H/Pico W/Pico WH compatible
Arduino Shield compatible
Pico RESET key
WS2812 RGB LED
Wide voltage input
DC power jack
Exposes all Pico GPIOs
SMD or Pin Headers soldering
DC jack input voltage:7~15V
Dimensions:68.6x53.3x11.6 mm
Weight:18g
ArduPico x 1
20Pin 2.54 pin header x 1
20Pin 2.54 pin female header x 1
3Pin 2.54 pin header x 1
3Pin 2.54 pin female header x 1
ArduPico x 1
Raspberry Pico Board x 1
20Pin 2.54 pin header x 1
20Pin 2.54 pin female header x 1
3Pin 2.54 pin header x 1
3Pin 2.54 pin female header x 1
Reference: DWM16122201
The 433MHz /868MHz /915MHz Arduino LoRa Shield is a long range transceiver on a Arduino shield form factor and based on Open source library.Compatible with Arduino Leonardo, Uno, Mega, DUE.
Reference: DWM22072502
The T-PicoC3 ESP32-C3 RP2040 Wireless WIFI Module is a Dual MCUs board Equipped with Raspberry Pi RP2040 and ESP32-C3 chip Support learning library TensorFlow, via TensorFlow Lite With 1.14in ST7789V IPS high definition LCD.
Reference: DWM23041901
The PI-232 RS232 HAT is a Serial communication HAT designed for use with the Rapsberry Pi A+/B+/2/3/4 (Also works with Zero/ZeroW, but it is HAT size)
Reference: DWM22092701
Usb3.0 Audio Ground Loop Eliminator/Isolator, Noise Filter, Wisddefender/ WisdSilencer Eliminate USB Power Noise by Breaking the Ground Loops, Eliminate the Buzzing Noise, Ground Loop Audio Noise Isolator.
Reference: DWM22051402
Raspberry Pi cluster board a standard size mini-ITX board to be put in a case with up to 6 RPI CM4 Compute Modules.
Reference: DWM23041901
The PI-232 RS232 HAT is a Serial communication HAT designed for use with the Rapsberry Pi A+/B+/2/3/4 (Also works with Zero/ZeroW, but it is HAT size)
ArduPico is An Arduino-style Carrier board which compatible Raspberry Pi Pico/Pico H/Pico W/Pico WH.
