Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
There are 475 products.
Active filters
Reference: DWM15081804
The CMT2250AW is HopeRF CMT single-chip, ultra low power and high performance device that consists of an OOK RF receiver, with 1920, 1527 and 2262 embedded data Decoder and 4 data output pins for various 300 to 480 MHz wireless applications.
Reference: DWM20033101
ER18505+SPC1520 Super Pulse Cap 4000mAh Li/SOCI2 unchargable battery for LSN50 Sensor nodes.
Reference: DWM15081805
The CMT2251AW is a HopeRF CMT single-chip, ultra low power and high performance device that consists of an OOK RF receiver, with 1920, 1527 and 2262 data decoder and 1 PWM output pin for various 300 to 480MHz wireless applications.
Reference: DWM20053001
DWM-RAK4600 LPWAN Module includes an nRF52832 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 2.0uA in sleep mode, high LoRa® output power up to 20dB max in work mode, and BLE output power up to 4dBm.
Reference: DWM15081806
The CMT2157AW is HopeRF CMT single-chip, highly flexible, high performance, OOK/(G)FSK RF transmitter with 1920, 1527 and 2262 data encoder ideal for 240 to 960 MHz wireless applications.
Reference: DWM20053001
The DWM-RAK4260 LPWAN Module is based on Microchip’s ATSAMR34J18B integrating a 32-bit ARM Cortex -M0+ MCU with a LoRa Transceive, provides a number of highly configurable peripherals (configurable as I2C/SPI/UART interfaces).
Reference: DWM15081807
The CMT2257AW is HopeRF CMT single-chip, ultra low power and high performance device that consists of an OOK/(G)FSK RF receiver, with 1920, 1527 and 2262 embedded data Decoder and 4 data output pins for various 300 to 960 MHz wireless applications.
Reference: DWM20053101
DWM-RAK4200 LPWAN Module includes an STM32L071 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 1.5uA in sleep mode and high LoRa® output power up to 19dBm max in work mode.
Reference: DWM15082001
The CMT2113AW is an ultra low-cost, highly flexible, high performance, single-chip (G)FSK transmitter for various 240 to 480 MHz wireless applications.
Reference: DWM20053102
DWM-RAK4600 LPWAN Module includes an nRF52832 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 2.0uA in sleep mode, high LoRa® output power up to 20dB max in work mode, and BLE output power up to 4dBm.
Reference: DWM15082002
The CMT2213AW is an ultra low power, high performance, low-cost (G)FSK stand-alone RF receiver for various 300MHz to 480 MHz wireless applications.
Reference: DWM20053103
The DWM-RAK4600 development board allows access to all serial and GPIO ports for easy configuration. The RAK4600 core module includes nRF52832 MCU and SX1276 LoRa® chip to help you quickly and easily develop/test your firmware.
Reference: DWM15100201
DWM-BNC BNC-JC-3 BNC male /Female RF coaxial connector for 50-3 (5 mm) coaxial cable.
Reference: DWM20053104
DWM-RAK4260 Breakout Module is specifically designed to allow easy excess to the pins on the module in order to simplify development and testing.
Reference: DWM15100202
BNC female to MMCX male 50ohm Rf coaxial connector Switch wiring RG316 extension jumper cable wire length can be customized.
Reference: DWM20060101
DWM-RAK4260 LPWAN Evaluation Board is a WisBlock product that consists of DWM-RAK4260 (DWM-RAK4260 LPWAN Module + Breakout board) and the RAK5005 WisBase
Reference: DWM15100203
BNC female to SMA Male 50ohm Rf coaxial connector Switch wiring RG316 extension jumper cable and wire length can be customized.
Reference: DWM20060102
DWM-RAK4200 Breakout Module is specifically designed to allow easy excess to the pins on the module in order to simplify development and testing.it's utilized is of an Xbee form factor.
Reference: DWM15100204
BNC female to MCX female 50ohm Rf coaxial connector Switch wiring RG316 extension jumper cable and wire length can be customized.
Reference: DWM20061502
The LWL01 is a LoRaWAN Water Leak Sensor. It detects the water leak status and will send periodically data every day as well as for water leak event. It also count the water leak event times and also calculate last water leak duration.
