Filter By
Categories
Categories
Color
Color
Availability
Availability
Price
Price
$7.00 - $690.00
Part Number
Part Number
Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Supply Arduino, ARM and other specifical application EVB and DK platform.
Subcategories
There are 29 products.
Active filters
Reference: DWM14121901
Cooperkit is a modular electronics platform. Each module has its own function, such as light sensing, wireless communication, etc.
Reference: DWM14032106
The Arduino Uno Rev3 is a microcontroller board based on the ATmega328.
Reference: DWM14121902
Cooperkit Button is finger-sized, which can be connected to I/O port of main board or externally disconnected to check the switch state so as to control ON/OFF of LED lamp.
Reference: DWM14032904
JY-MCU 8/16 bite LED digital tube display module, can cascade and extend the display module, LED, arduino.
Reference: DWM14121903
Cooperkit Buzzer is connected to the digital I / O port, when the output is low, buzzer will give a long sound. If it is connected to an analog pulse width modulation (PWM) output , the buzzer can produce a variety of tones, which can be made into the speaker of electronic organ.
Reference: DWM14032905
JY-MCU 8 (digital tube + keys + two-color LED module) - Driver IC TM1638, red & green digital tube.
Reference: DWM14121904
CooperKit DHT11 digital temperature & humidity sensor features a digital temperature & humidity sensor complex with a calibrated digital signal output. Its single-bus operation, extremely small size and low consumption enable it to be used in HVAC, automotive, weather stations, dehumidifier and other applications.
Reference: DWM14051501
Mega 2560 R3, Mega2560 REV3 ATmega2560-16AU Board + USB Cable compatible for arduino.
Reference: DWM14121905
CooperKit Hall Sensor measures the Hall Effect with A3144, the output of the Hall sensor turns on when a magnetic field (south polarity) perpendicular to the Hall sensor exceeds the BOP threshold, and it switches low and turn off when the magnetic field disappears.
Reference: DWM14080701
Arduino W5200 Ethernet Shield with Micro SD card socket and RJ45 Enthernet jack.
Reference: DWM15110404
BeagleBone Black is an MSRP community-supported development platform for developers and hobbyists. Boot Linux in under 10 seconds and get started on development in less than 5 minutes with just a single USB cable.
Reference: DWM14080702
The Bluetooth Shield integrates a Serial Bluetooth module included Bluetooth 2.0 or Bluetooth 4.0.
Reference: DWM18011601
RAK8211-NB iTracker combines NB-IoT+BLE+GPS+ 5 Sensors Development Board has BLE GPRS GPS three in one module perfectly solves the problem of data interaction and control in the outdoor environment and the three party platform.
Reference: DWM14080703
GPRS GSM Shield for Arduino,it delivers GSM/GPRS 850/900/1800/1900MHz signals for Audio, SMS and GPRS Service.
Reference: DWM24022901
The P-NUCLEO-LRWAN2 STM32 Nucleo starter pack is a development tool to learn and quickly develop low-power wide-area network (LPWAN) solutions. The pack contains both an LPWAN end-node and its related gateway.
Reference: DWM15080501
DWM-DS3231 is high precision Real Time Clock Module For Arduinowhich equipped with integrated TCXO and crystal.
Reference: DWM24030301
The B200 Advanced version can seamlessly replace the B200 Original version and provides dual-receive dual-transmit capability.
Reference: DWM15080502
DWM-DS1307is high precision Real Time Clock Module For Arduinowhich equipped with integrated TCXO and crystal.
Reference: DWM24030302
The USRP B210 SDR Kit is built-in with an Xilinx Spartan 6 XC6SLX150 FPGAFully Compatible with the original B210 SDR kit.
Reference: DWM14102404
Low cost GY-273 HMC5883L Module Triple Axis Compass Magnetometer Sensor.
