Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Cooperkit is a modular electronics platform. Each module has its own function, such as light sensing, wireless communication, etc.
Products description:
Cooperkit is a modular electronics platform. Each module has its own function, such as light sensing, wireless communication, etc. Along with the hardware modules for instant plug in, the stackable reusable code components are provided in the free and easy-to-use CoIDE, saving you significant time and energy for full-featured applications. It can be used with all kinds of Arduino™ form-factor compatible mother boards including Cookie, Embedded Pi, FRDM board, etc.
Package list:
Cooperkit - Connect Shield
Cooperkit – Button
Cooperkit – Buzzer
Cooperkit - Tilt Switch
Cooperkit - Rotary Angle Sensor
Cooperkit - Light Sensor
Cooperkit - Touch Sensor
Cooperkit - Chainable RGB LED
Cooperkit - Water Sensor
Cooperkit - DHT11 Temp&Humi Sensor
Cooperkit – Relay
Cooperkit - Hall Sensor
Cooperkit - Gas Sensor(MQ2)
Cooperkit – MIC
Cooperkit - NRF24L01
3 Pin Dual-female to 4 pin Converter Cable - 20cm
4 pin Converter Cable - 20cm
Reference: DWM14121902
Cooperkit Button is finger-sized, which can be connected to I/O port of main board or externally disconnected to check the switch state so as to control ON/OFF of LED lamp.
Reference: DWM14121903
Cooperkit Buzzer is connected to the digital I / O port, when the output is low, buzzer will give a long sound. If it is connected to an analog pulse width modulation (PWM) output , the buzzer can produce a variety of tones, which can be made into the speaker of electronic organ.
Reference: DWM14121904
CooperKit DHT11 digital temperature & humidity sensor features a digital temperature & humidity sensor complex with a calibrated digital signal output. Its single-bus operation, extremely small size and low consumption enable it to be used in HVAC, automotive, weather stations, dehumidifier and other applications.
Reference: DWM14121905
CooperKit Hall Sensor measures the Hall Effect with A3144, the output of the Hall sensor turns on when a magnetic field (south polarity) perpendicular to the Hall sensor exceeds the BOP threshold, and it switches low and turn off when the magnetic field disappears.
Reference: DWM14121903
Cooperkit Buzzer is connected to the digital I / O port, when the output is low, buzzer will give a long sound. If it is connected to an analog pulse width modulation (PWM) output , the buzzer can produce a variety of tones, which can be made into the speaker of electronic organ.
Reference: DWM14121902
Cooperkit Button is finger-sized, which can be connected to I/O port of main board or externally disconnected to check the switch state so as to control ON/OFF of LED lamp.
Reference: DWM14121904
CooperKit DHT11 digital temperature & humidity sensor features a digital temperature & humidity sensor complex with a calibrated digital signal output. Its single-bus operation, extremely small size and low consumption enable it to be used in HVAC, automotive, weather stations, dehumidifier and other applications.
Reference: DWM15110404
BeagleBone Black is an MSRP community-supported development platform for developers and hobbyists. Boot Linux in under 10 seconds and get started on development in less than 5 minutes with just a single USB cable.
Reference: DWM18011601
RAK8211-NB iTracker combines NB-IoT+BLE+GPS+ 5 Sensors Development Board has BLE GPRS GPS three in one module perfectly solves the problem of data interaction and control in the outdoor environment and the three party platform.
Reference: DWM14121905
CooperKit Hall Sensor measures the Hall Effect with A3144, the output of the Hall sensor turns on when a magnetic field (south polarity) perpendicular to the Hall sensor exceeds the BOP threshold, and it switches low and turn off when the magnetic field disappears.
Reference: DWM24030301
The B200 Advanced version can seamlessly replace the B200 Original version and provides dual-receive dual-transmit capability.
Reference: DWM24030302
The USRP B210 SDR Kit is built-in with an Xilinx Spartan 6 XC6SLX150 FPGAFully Compatible with the original B210 SDR kit.
Reference: DWM24022901
The P-NUCLEO-LRWAN2 STM32 Nucleo starter pack is a development tool to learn and quickly develop low-power wide-area network (LPWAN) solutions. The pack contains both an LPWAN end-node and its related gateway.
Cooperkit is a modular electronics platform. Each module has its own function, such as light sensing, wireless communication, etc.
