Filter By
Categories
Categories
Color
Color
Availability
Availability
Price
Price
$7.00 - $690.00
Part Number
Part Number
Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
There are 52 products.
Reference: DWM24022901
The P-NUCLEO-LRWAN2 STM32 Nucleo starter pack is a development tool to learn and quickly develop low-power wide-area network (LPWAN) solutions. The pack contains both an LPWAN end-node and its related gateway.
Reference: DWM22083001
SI4732-Radio-ESP32-2.8 inch TFT Touchscreen-Arduino Si4732 chip all Band Radio DSP Receiver FM LW SSB 2.8 inch Big Touch Screen PAM8406 HiFi Headphone Amp.
Reference: DWM15080501
DWM-DS3231 is high precision Real Time Clock Module For Arduinowhich equipped with integrated TCXO and crystal.
Reference: DWM24030301
The B200 Advanced version can seamlessly replace the B200 Original version and provides dual-receive dual-transmit capability.
Reference: DWM22051402
Raspberry Pi cluster board a standard size mini-ITX board to be put in a case with up to 6 RPI CM4 Compute Modules.
Reference: DWM15080502
DWM-DS1307is high precision Real Time Clock Module For Arduinowhich equipped with integrated TCXO and crystal.
Reference: DWM24030302
The USRP B210 SDR Kit is built-in with an Xilinx Spartan 6 XC6SLX150 FPGAFully Compatible with the original B210 SDR kit.
Reference: DWM22090901
Raspberry Pi 4 Model B Broadcom BCM2711 2GB, 4GB or 8GB LPDDR4-3200 SDRAM available dual-band 2.4/5.0 GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capability.
Reference: DWM14102404
Low cost GY-273 HMC5883L Module Triple Axis Compass Magnetometer Sensor.
Reference: DWM22090802
Raspberry Pi 3 Model B+ boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT.
Reference: DWM15101801
USB Nano V3.0 ATmega328P 5V 16M Micro-controller Board FT232RL For Arduino.
Reference: DWM22090803
The Raspberry Pi 3 Model B is based on the 64-bit quad-core Broadcom BCM2837 ARMv8 core with a processor clock of 1.2 GHz and is therefore up to ten times more powerful than a first-generation Raspberry Pi with wireless LAN and Bluetooth connectivity.
Reference: DWM16061301
6mm Knob Cap Round Hole Dia for Rotary Potentiometer 40mm x 6mm,With the concave point,Brushed aluminum alloy,For arduino.
Reference: DWM22091001
CM4 Raspberry pi Computer module 4 with wireless check out the full range of Compute Modules 4.
Reference: DWM16121104
Easy Pulse Plugin is an Arduino compatible and breadboard friendly pulse sensor based on the principle of photoplethysmography.
Reference: DWM22091101
BPI-R3 Router board with MediaTek MT7986(Filogic 830) quad core ARM A53 + MT7531A chip design ,2G DDR RAM ,8G eMMC flash onboard, it is a very high-performance open-source router development board, support Wi-Fi 6/6E 2.4G Wi-Fi use MT7975N and 5G Wi-Fi use MT7975P, support 2 SFP 2.5GbE port, and 5 GbE network port.
Reference: DWM16122301
The Lora BEE is based on the SX1276/SX1278 transceiver.The Lora BEE targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection,building automation.
Reference: DWM22091205
CM4 Raspberry pi Computer module 4 without wireless check out the full range of Compute Modules 4.
Reference: DWM18022201
Dragino LoRa IoT Development Kit is designed to facilitate beginners and developers to quickly learn LoRa and IoT technology.it will show how to build LoRa network, and how to use the network to send data from a LoRa sensor node to the cloud server.
Reference: DWM22101001
HDMI to CSI-2 Adapter Board built by TC358743XBG is an HDMI to CSI-2 camera port adapter designed for Raspberry Pi with up to 1080p@30fps support.all versions of Raspberry Pi series boards are supported.
