Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Low Price ESP-12E ESP8266 Serial Wi-Fi Wireless Transceiver Module for Arduino / RPi Built-in Antenna.it's for Arduino,Raspberry Pi , AVR and widely used in networking, smart home,wifi router.
ESP-12E is an enhanced version ESP8266-12, improve the external circuit, enhanced impedance signal output is better, whether it is stable or anti-jamming capability, have been greatly improved ! Before selecting a user for ESP-12 's, it does not matter even if the product has been made , enhanced version is fully compatible with previous firmware pin has added the ESP-12 on the basis of six IO ports , SPI mouth leads , develop more convenient, application more extensive. It can be used for remote monitoring of home appliances, bedroom temperature and humidity, and controlling home appliances by the mobile phone.
Features:
- Compatible with ESP-12
- Communication interface voltage: 3.3V
- IO Port Package: Both SMD and Inline package are available, and the pin pitch is 2.0mm.
- Antenna Type: Built-in PCB antenna is available
- Wireless Network Mode: station / soft AP / Soft AP + station
- Wireless criteria: 802.11 b / g / n
- Wi-Fi @ 2.4 GHz, support for WPA / WPA2 security mode
- It is very easy to develop projects with AT command
Application: Home automation, sensor networks, industrial wireless control
| General | |
|---|---|
| Quantity | 1Piece |
| Color | Black + Golden + Multi-Colored |
| Material | PCB + alloy |
| Specification | |
| Interface | Built-in PCB |
| Frequency Range | 2.4GHz |
| Dimensions & Weight | |
|---|---|
| Dimensions | 0.94 in x 0.63 in x 0.12 in (2.4 cm x 1.6 cm x 0.3 cm) |
| Weight | 0.06 oz (1.7 g) |
| Packing List |
|---|
| 1 x ESP-12E Wi-Fi module |
Reference: DWM14032106
The Arduino Uno Rev3 is a microcontroller board based on the ATmega328.
Reference: DWM14120901
Low cost ESP8266 ESP-01 Serial to WIFI Wireless Transceiver Module it's for Arduino,Raspberry Pi , AVR and ARM DK.
Reference: DWM15073001
Low cost DWM-ESP8266 ESP-02 Serial to WIFI wireless transceiver module with IPEX external antenna connector it's for Arduino,Raspberry Pi , AVR and ARM DK and widely used in networking, smart home project when it is connected to the wifi router.
Reference: DWM15073002
DWM-ESP8266 ESP-05 DIP package Serial to WIFI wireless transceiver module with IPEX external antenna connector it's for Arduino,Raspberry Pi , AVR and ARM DK and widely used in networking, smart home project when it is connected to the wifi router.
Reference: DWM15081902
Low cost DWM-ESP8266 ESP-05 Serial to WIFI wireless transceiver module with IPEX external antenna connector and chip anetnna it's for Arduino,Raspberry Pi , AVR and widely used in networking, smart home project when it is connected to the wifi router.
Reference: DWM16121103
Easy Pulse is a DIY pulse sensor that can be used for detecting the cardio-vascular pulse wave from a fingertip.
Reference: DWM17082403
WT8266-S2 ESP8266 Wi-Fi network control module With IPEX connector, IoT application requirements in smart power grids, building automation, security and protection, smart home, remote health care etc.
Reference: DWM17082406
WT51822-S4AT nRF5182 BLE 4.1 Low Energy Bluetooth Module with PCB antenna high performance ,low power radio transmit and receive system module use Nordic BLE 4.1 nRF51822-QFAA as the controller chips.
Reference: DWM23090801
The AR9331 is a minimal system which installed with OpenWrt Linux system and support 2.4G WiFi It is compatible with 802.11b/g/n.widely use as an IoT gateway core modules.
Reference: DWM17082401
WT8266-S1 ESP8266 low consumption, high performance embedded Wi-Fi network control module,It can be used the IoT application requirements in smart power grids, building automation, security and protection, smart home, remote health care etc.
Reference: DWM14101101
Low cost UART-WIFI module, DWM-HLK-RM30 is a serial device provide solution for serial device transfer data with Ethernet.
Reference: DWM21030901
The WT-01F module core processor ESP8285 integrates the industry-leading Tensilica L106 ultra-low-power 32-bit micro MCU the main frequency supports 80 MHz and 160 MHz, and supports RTOS, Integrated Wi-Fi MAC/BB/RF/PA/LNA, external spring antenna.
Reference: DWM21031004
Wt32-s1 WiFi module is a low-power, cost-effective embedded wireless network control module developed by Qiming cloud technology. It can meet the needs of IOT applications, such as smart grid, building automation, security, smart home and telemedicine.
Reference: DWM17072503
ESP32S Wifi Bluetooth IOT wireless module which combined the WiFi 802.11b/g/n/e/i and Bluetooth v4.2 BR/EDR & BLE standard, providing a series of solutions of Wifi and Bluetooth to support open real-time operating systems (RTOS).
Reference: DWM14072601
Serial to WiFi/Serial to RJ45/RJ45 to WiFi/WiFi Router StartKit.
Reference: DWM14032501
HLK-RM04 is Hi-Link low-cost embedded UART-ETH-WIFI converter module (serial port - Ethernet -Wireless network) you can take it as an ethernet wireless brige can used to be an wireless internet network and wifi router.
Reference: DWM25042501
PCIE-M.2 WiFi6 AX210N Module for WLAN/ Bluetooth, which can work with the RAK7391 IOT LoRaWAN Gateway Carrier Board MiniPCIe Slot #3.
Reference: DWM19011502
The OLG01-N is an Water proof outdoor setting open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
Reference: DWM20030402
EasyESP-1 WiFi-enabled ESP8266 microcontroller is a rapid prototyping and development board for the low-cost, specially designed for beginners.
Reference: DWM25042502
Alfa Networks AHPI7292S WiFi HaLow Pi Hat is compatible with the Raspberry Pi to be mounted on top of the Raspberry Pi, which can work with the RAK7391 IOT LoRaWAN Gateway Carrier Board.
Reference: DWM19062801
ESP32-WROOM-32D and ESP32-WROOM-32U are powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding.
Low Price ESP-12E ESP8266 Serial Wi-Fi Wireless Transceiver Module for Arduino / RPi Built-in Antenna.it's for Arduino,Raspberry Pi , AVR and widely used in networking, smart home,wifi router.
