Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Low cost TT Motor Smart Car Robot Gear Motor for Arduino and robot and toys.
Motor parameters in detail:
1, there are two kinds of motor 1:48 (biaxial) and 1:12 0 (uniaxial) 3V speed 125 and 50, wheel speed are 48 and 15 respective
2, No load current (6 v) : 70 mA
3 (6 v), Maximum torque: 5500 g * cm
4, size: 70.50 mm x 27.00 mm x 23.00 mm (length x width x height)
5, weight, size: 40 g
6, working voltage: 3-6 v
Packing list:
6v gear motor: 1pcs
65 mm wheel: 1pcs
Reference: DWM14032106
The Arduino Uno Rev3 is a microcontroller board based on the ATmega328.
Reference: DWM14123001
The Balanbot is a Arduino Based Self-balancing Robot Kit.It's Open Source and easy to assemble.
Reference: DWM15090901
DWM-2WD Smart Car Kit is an kit base on the Arduino UNO with Bluetooth Control.
Reference: DWM16012602
DWM-RF4432 is 433MHz /868MHz /915MHz ISM Free band adopts Silicon Lab Si4432 RF chip and Hoperf RFM22B +20dBm wireless transceivers module.
Reference: DWM14071701
Dupont cable 20 cm 40pcs / Row male-male, male-female, and female-female.
Reference: DWM15100308
SMA Male to Female 50ohm Rf coaxial connector Switch wiring RG316 extension jumper cable and wire length which can be customized.
Reference: DWM141211LA
Low cost 315 /433MHz ASK /OOK RF transmitter and receiver kit for Arduino project.
Reference: DWM15101101
The E931.96 is an ultra-low power motion detector controller integrated circuit. The device is ideally suited for battery operated wireless motion sensors that make use of an MCU for handling com munication.
Reference: DWM14040401
Varity package(0603) SMD Resistor,1% & 5% Acuracy for Resistor Samples kit.
Reference: DWM14120601
2.4GHz Low cost Ceramic patch antennas for wireless communication.
Reference: DWM17080704
MTH02 Digital Temperature & Humidity Sensor is Japan's Hokuriku resistive humidity sensor production as a Temperature & Humidity sensor.
Reference: DWM18122801
DWM-HC210C CC115L 315MHz /433MHz /868MHz /915MHz Small size Transmitter rf module is a low-cost sub-1 GHz transmitter designed for very low-power wireless appli-cations base on the TI CC115L RF chipset.
Reference: DWM15100309
SMA Male to MCX male 50ohm Rf coaxial connector Switch wiring RG316 extension jumper cable and wire length which can be customized.
Reference: DWM14070601
1 Female to 2 Male Battery Extension Parallel Cable W 12AWG Wire XT60 Plug, Male head connects with aircraft, the other two heads connect with batteries.
Reference: DWM14072305
ProtoShield PCB for SOP08 /SSOP08 and the lead pitch are 1.27mm(Front) and 0.65mm(Back).
Reference: DWM14032107
The HP203B / HP206C are 24Bit Barometer sensor, employs a MEMS pressure sensor with an I2C interface to provide accurate temperature, pressure or altitude data.
Reference: DWM16092103
DWM- A4988 StepStick Stepper Driver Module lets you control one bipolar stepper motor at up to 2 A output current per coil.
Reference: DWM18102405
DWM-TS9 right male to N Female 50ohm Rf coaxial connector Switch wiring RG316 extension jumper cable and wire length which can be customized.
Low cost TT Motor Smart Car Robot Gear Motor for Arduino and robot and toys.
