Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
WaveShare ATMEL AVR Programmers USB AVRISP XPII Compatible AT AVR ISP mkII In-System Supports AVR Studio 4/5/6.
Features
|
 Connecting USB AVRISP XPII to the target board (Click on the image to enlarge) AT AVRISP mkII compliant Based on AT AVRISP mkII firmware Upgradable firmware Supported software Device Support
Supports all the different voltages and speed grade versions of the devices listed in the table above. Performance Connects to PC The USB AVRISP XPII connects to the target board through 3 optional cables. Depending on the existed connector on the target board, the cable has to be changed accordingly. - Standard 6-pin ISP Connector, Using 6-pin ISP cable - Standard 10-pin ISP Connector, Using 6-pin to 10-pin ISP cable - Custom ISP Connector, Using 6-wire multicolour custom connector cable The figure 1 and 2 shows the pinouts for the 10-pin and 6-pin ISP connectors.
Powered from USB bus - Draws power from the USB bus, No need for Additional Power Supply - The target board should be powered from Another Power Supply |
Weight: 0.161 kg
|
1 |
2 |
3 |
4 |
5 |
6 |
Development resources:user guide, software, etc.
Wiki: www.waveshare.com/wiki/USB_AVRISP_XPII
Reference: DWM15110401
WaveShare ATMEL AVR Programmers & Debuggers USB AVR JTAGICE XPII Compatible Atmel JTAGICE mkII In-System Programmer and debuggers Supports AVR Studio 4/5/6.
Reference: DWM15080602
USBASP USBISP Downloader Programmer for 51 AVR,With power and program the two indicators,On-board over-current protection,Support 5V and 3.3V power supply to the target board.
Reference: DWM15110401
WaveShare ATMEL AVR Programmers & Debuggers USB AVR JTAGICE XPII Compatible Atmel JTAGICE mkII In-System Programmer and debuggers Supports AVR Studio 4/5/6.
Reference: DWM14041801
CoLinkEx is a hardware debugging adapter which supports JTAG & SW debugging with ARM Cortex M devices in CooCox software and Keil RealView MDK.
Reference: DWM14032701
Xilinx Platform USB Cable, DLC9G , JTAG programmer , FPGA/CPLD Download Cable.
Reference: DWM16110102
Mini USB to RS485 / RS422 Converter FTDI CHIP converter adapter with Screw Terminals and photoelectric isolation.
Reference: DWM14032103
Mini USB to RS485 / RS422 Converter FTDI CHIP converter adapter with Screw Terminals and photoelectric isolation.
Reference: DWM14072101
Logic8/16 USB 24/100M logic analyzer / perfect decoder logic analyzer.
WaveShare ATMEL AVR Programmers USB AVRISP XPII Compatible AT AVR ISP mkII In-System Supports AVR Studio 4/5/6.
