- New
![](https://dwmzone.com/4411-large_default/lilygo-t-deck-esp32-s3-lora-development-board-with-28-inch-touchscreen.jpg)
Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
T-Deck LoRa is a pocket-sized gadget with an SX1262 LoRa module, a 2.8-inch, 320 x 240 pixel IPS LCD, a mini keyboard, and an ESP32 dual-core processor.
T-Deck LoRa is a pocket-sized gadget with an SX1262 LoRa module and a 2.8-inch, 320 x 240 pixel IPS LCD, a mini keyboard, and an ESP32 dual-core processor. While it's not exactly a smartphone, you can use your programming knowledge to turn it into a standalone messaging device, or coding software.
MCU | ESP32-S3FN16R8 Dual-core LX7 microprocessor |
Wireless Connectivity | 2.4 GHz Wi-Fi & Bluetooth 5 (LE) |
Development | Arduino, PlatformlO-IDE, Micropython |
Flash | 16MB |
PSRAM | 8MB |
Battery ADC PIN | IO04 |
Onboard functions | Trackball, Microphone, Speaker |
2.8 inch ST7789 SPI Interface IPS LCD: Resolution: 320 x 240 Full viewing angle | |
SX1262 LoRa Transceiver (Chip Optional) | |
Transmit power | +22dBm |
Frequency Optional | 433/868/915Mhz |
1 X T-Deck
1 X Pin(6pin)
1 X Power cable
1 X FPC Antenna
Reference: DWM22083001
SI4732-Radio-ESP32-2.8 inch TFT Touchscreen-Arduino Si4732 chip all Band Radio DSP Receiver FM LW SSB 2.8 inch Big Touch Screen PAM8406 HiFi Headphone Amp.
Reference: DWM22091301
The TrackerD is built-in with GPS, Wi-Fi, BLE, Temperature, Humidity, Motion Detection, and Buzzer which can use Arduino IDE to customize the software for IoT solution.
Reference: DWM22123004
WiFi LoRa 32 is a classic IoT dev-board designed & produced by Heltec Automation. The newly launched V3 version has the same pin sequence as the V2 version and retains Wi-Fi, BLE, LoRa, OLED display, and other functions.
Reference: DWM24062601
The CORE Board comprises ESP32-S3, LoRa SX1262, and GPS (with the option of U-blox MAX-M10S-00B or L76K chip) can be replaced according to your experiment requirements, and the UBLOX and L76K versions are currently available.
Reference: DWM24062401
TTGO T-Echo SoftRF LoRa SX1262 Wireless Module 433/868/915MHz NRF52840 1.54 E-Paper GPS RTC NFC BME280 for Arduino.
Reference: DWM17072504
Blue 0.96OLED display module is small, only 0.96” diagonal, it is made of 128x64 individual blue OLED pixels,uses I2C to communicate with microcontroller such as Arduino.
Reference: DWM22090501
White Color 0.96OLED display module is small, only 0.96” diagonal, it is made of 128x64 individual blue OLED pixels,uses I2C to communicate with microcontroller such as Arduino.
Reference: DWM22090502
This 1.3 Inch OLED SH1106 Display Function Shield module with Programming Buttons for LILYGO® T-Beam Development board.
Reference: DWM24062403
TTGO T-Echo Meshtastic LoRa SX1262 Wireless Module 433/868/915MHz NRF52840 1.54 E-Paper GPS RTC NFC BME280 for Arduino.
Reference: DWM24062601
The CORE Board comprises ESP32-S3, LoRa SX1262, and GPS (with the option of U-blox MAX-M10S-00B or L76K chip) can be replaced according to your experiment requirements, and the UBLOX and L76K versions are currently available.
Reference: DWM22072501
LILYGO 3.71 inch ink screen with touch can be used as a Raspberry Pi expands the module, and the corresponding pin-out interface is designed to adapt to the Raspberry Pi.
Reference: DWM24062402
TTGO T-Echo Meshtastic LoRa SX1262 Wireless Module 433/868/915MHz NRF52840 1.54 E-Paper GPS RTC NFC for Arduino.
Reference: DWM22090701
TTGO Meshtastic T-Beam V1.1 ESP32 LoRa Development Board 433MHz 868MHz 915MHz 923MHz with WiFi Bluetooth GPS and 0.96 OLED Display.
Reference: DWM24062602
The T-Beam S3 SoftRF LoRa Development kit embedded a SUPREME CORE board which comprises ESP32-S3, LoRa SX1262, and GPS (with the option of U-blox MAX-M10S-00B or L76K chip).
Reference: DWM22090702
T-Beam V1.1 IPEX ESP32 LORA 433/868/915/923MHZ WiFi Wireless Bluetooth Module GPS NEO-M8N IPEX 18650 Battery Holder.
Reference: DWM22091502
TTGO T-Echo SoftRF LoRa SX1262 Wireless Module 433/868/915MHz NRF52840 1.54 E-Paper GPS RTC NFC for Arduino.
Reference: DWM22072502
The T-PicoC3 ESP32-C3 RP2040 Wireless WIFI Module is a Dual MCUs board Equipped with Raspberry Pi RP2040 and ESP32-C3 chip Support learning library TensorFlow, via TensorFlow Lite With 1.14in ST7789V IPS high definition LCD.
T-Deck LoRa is a pocket-sized gadget with an SX1262 LoRa module, a 2.8-inch, 320 x 240 pixel IPS LCD, a mini keyboard, and an ESP32 dual-core processor.