Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Blue 0.96OLED display module is small, only 0.96” diagonal, it is made of 128x64 individual blue OLED pixels,uses I2C to communicate with microcontroller such as Arduino.
Reference: DWM17072502
D-duino is a combination of ESP8266 and OLED is a 6 IOT WiFi NodeMCU Development Board .
Reference: DWM17120404
0.96 OLED Display ESP32 WIFI Bluetooth SX1278 433MHz Lora IOT Development Board for Arduino Smart Home.
Reference: DWM22090501
White Color 0.96OLED display module is small, only 0.96” diagonal, it is made of 128x64 individual blue OLED pixels,uses I2C to communicate with microcontroller such as Arduino.
Reference: DWM17111803
Raspberry Pi 7inch HDMI LCD (C) + Bicolor case1024×600 Capacitive Touch Screen Supports Multi mini-PCs,Windows 10/8.1/8/7 OS Multi Systems.
Reference: DWM14121701
Low cost Blue screen 16x2 Character LCD Display Module HD44780 Controller blue blacklight.
Reference: DWM14110201
5mm Round White Blue Yellow Green Red Super bright emitting LED diode.
Reference: DWM17111805
Raspberry Pi 5inch HDMI LCD + Bicolor case 800×480 Capacitive Touch Screen Supports Multi mini-PCs,Windows 10/8.1/8/7 OS Multi Systems.
Reference: DWM17111804
Raspberry Pi 7inch HDMI LCD (B) + Bicolor case 800×480 Capacitive Touch Screen Supports Multi mini-PCs,Windows 10/8.1/8/7 OS Multi Systems.
Reference: DWM22090502
This 1.3 Inch OLED SH1106 Display Function Shield module with Programming Buttons for LILYGO® T-Beam Development board.
Reference: DWM14110203
5mm Round White Blue Yellow Green Red emitting LED diode.
Reference: DWM14110202
150pcs 5mm LED Light White Yellow Red Green Blue Assorted Kit DIY LEDs Set.
Reference: DWM17122001
0.2 inch 1bit Blue/ Red digital LED tube SMD common-anode display
Reference: DWM14110101
3mm Red Green Yellow white blue Color LED Light Emitting Diodes.
Reference: DWM22090501
White Color 0.96OLED display module is small, only 0.96” diagonal, it is made of 128x64 individual blue OLED pixels,uses I2C to communicate with microcontroller such as Arduino.
Reference: DWM17111802
Raspberry Pi 3 10.1inch HDMI LCD (H) (with case), 1024x600 Capacitive Touch Screen Supports Multi mini-PCs, Windows 10/8.1/8/7 OS Multi Systems.
Reference: DWM14110205
3mm Red Green Yellow white blue Color LED Light Emitting Diodes.
Reference: DWM14110102
150pcs 3mm LED Light White Yellow Red Green Blue Assorted Kit DIY LEDs Set.
Reference: DWM14110204
150pcs 5mm LED Light White Yellow Red Green Blue Assorted Kit DIY LEDs Set.
Reference: DWM17111801
Capacitive Display 10.1inch HDMI LCD (B)(with case) IPS Touch Screen 1280*800 For Raspberry Pi 3 Supports Multi mini-PCs, Windows 10/8.1/8/7 OS Multi Systems.
Blue 0.96OLED display module is small, only 0.96” diagonal, it is made of 128x64 individual blue OLED pixels,uses I2C to communicate with microcontroller such as Arduino.
