Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The CORE Board comprises ESP32-S3, LoRa SX1262, and GPS (with the option of U-blox MAX-M10S-00B or L76K chip) can be replaced according to your experiment requirements, and the UBLOX and L76K versions are currently available.
The CORE Board comprises ESP32-S3, LoRa SX1262, and GPS (with the option of U-blox MAX-M10S-00B or L76K chip).
The CORE Board can be replaced according to your experiment requirements, and the UBLOX and L76K versions are currently available.
ESP32-S3FN8 Dual-core LX7 microprocessor
2.4 GHz Wi-Fi & Bluetooth5 (LE)
Arduino, PlatformlO-IDE, Micropython
Boot (IO00) + Reset + Power Button
8MB
8MB
Six-axis IMU QMI8658
| L76K | MAX-M10S-00B | |||
| Properties | Compact GNSS Module | Professional Ultra-low-power high-performance GNSS Module |
||
| Positioning Support | GPS、Beidou、GLONASS | GPS、Beidou、GLONASS、 Galileo | ||
| GNSS Parallelism | Support 2 groups running simultaneously | Support 4 groups running simultaneously | ||
| Update Rate | 1Hz(Default) up to 10Hz |
Up to 5 Hz(4 Groups GNSS) Up to 18 Hz(single GNSS) |
||
| Oscillator | None | Temperature Compensated Crystal Oscillators(TCXO) |
||
1x Core Board( option of U-blox MAX-M10S-00B or L76K )
1x LoRa Antenna
1x GPS antenna
1x IPEX to SMA Femail connector
Reference: DWM22090702
T-Beam V1.1 IPEX ESP32 LORA 433/868/915/923MHZ WiFi Wireless Bluetooth Module GPS NEO-M8N IPEX 18650 Battery Holder.
Reference: DWM24062401
TTGO T-Echo SoftRF LoRa SX1262 Wireless Module 433/868/915MHz NRF52840 1.54 E-Paper GPS RTC NFC BME280 for Arduino.
Reference: DWM24062402
TTGO T-Echo Meshtastic LoRa SX1262 Wireless Module 433/868/915MHz NRF52840 1.54 E-Paper GPS RTC NFC for Arduino.
Reference: DWM24062602
The T-Beam S3 SoftRF LoRa Development kit embedded a SUPREME CORE board which comprises ESP32-S3, LoRa SX1262, and GPS (with the option of U-blox MAX-M10S-00B or L76K chip).
Reference: DWM24062602
The T-Beam S3 SoftRF LoRa Development kit embedded a SUPREME CORE board which comprises ESP32-S3, LoRa SX1262, and GPS (with the option of U-blox MAX-M10S-00B or L76K chip).
Reference: DWM22072501
LILYGO 3.71 inch ink screen with touch can be used as a Raspberry Pi expands the module, and the corresponding pin-out interface is designed to adapt to the Raspberry Pi.
Reference: DWM22090702
T-Beam V1.1 IPEX ESP32 LORA 433/868/915/923MHZ WiFi Wireless Bluetooth Module GPS NEO-M8N IPEX 18650 Battery Holder.
Reference: DWM24070901
T-Deck LoRa is a pocket-sized gadget with an SX1262 LoRa module, a 2.8-inch, 320 x 240 pixel IPS LCD, a mini keyboard, and an ESP32 dual-core processor.
Reference: DWM22090502
This 1.3 Inch OLED SH1106 Display Function Shield module with Programming Buttons for LILYGO® T-Beam Development board.
Reference: DWM22090701
TTGO Meshtastic T-Beam V1.1 ESP32 LoRa Development Board 433MHz 868MHz 915MHz 923MHz with WiFi Bluetooth GPS and 0.96 OLED Display.
Reference: DWM24062401
TTGO T-Echo SoftRF LoRa SX1262 Wireless Module 433/868/915MHz NRF52840 1.54 E-Paper GPS RTC NFC BME280 for Arduino.
Reference: DWM24062402
TTGO T-Echo Meshtastic LoRa SX1262 Wireless Module 433/868/915MHz NRF52840 1.54 E-Paper GPS RTC NFC for Arduino.
Reference: DWM22091502
TTGO T-Echo SoftRF LoRa SX1262 Wireless Module 433/868/915MHz NRF52840 1.54 E-Paper GPS RTC NFC for Arduino.
Reference: DWM22072502
The T-PicoC3 ESP32-C3 RP2040 Wireless WIFI Module is a Dual MCUs board Equipped with Raspberry Pi RP2040 and ESP32-C3 chip Support learning library TensorFlow, via TensorFlow Lite With 1.14in ST7789V IPS high definition LCD.
Reference: DWM17072504
Blue 0.96OLED display module is small, only 0.96” diagonal, it is made of 128x64 individual blue OLED pixels,uses I2C to communicate with microcontroller such as Arduino.
Reference: DWM24062403
TTGO T-Echo Meshtastic LoRa SX1262 Wireless Module 433/868/915MHz NRF52840 1.54 E-Paper GPS RTC NFC BME280 for Arduino.
Reference: DWM22090501
White Color 0.96OLED display module is small, only 0.96” diagonal, it is made of 128x64 individual blue OLED pixels,uses I2C to communicate with microcontroller such as Arduino.
The CORE Board comprises ESP32-S3, LoRa SX1262, and GPS (with the option of U-blox MAX-M10S-00B or L76K chip) can be replaced according to your experiment requirements, and the UBLOX and L76K versions are currently available.
