Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
HopeRF DK / EVB RFduino board which is compatible with Arduino UNO R3 and Arduino IDE.
Brief introduction
1.Hoperf modules + Arduino =RFduino
2.The main board are with the controller ATMEGA328P.
3.Released the RFM6X and RFM9X series module library which are compatible with Arduino IDE
4.It's a good way to represent the technique problems to us.
Userfull Link:
HopeRF_RFDK_RFMxx_DEMO_V2.1_operation_manual
RFduino Board & LoRa module as DK board User guide
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14041802
HopeRF DK / EVB module kits with number kinds of module which will plug into the DK & EVB board.
Reference: DWM14060701
The TH02 is a digital relative humidity and temperature sensor. This monolithic CMOS IC integrates temperature and humidity sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
Reference: DWM17081603
The RFM119W is a high performance, highly flexible, low-cost, single-chip (G)FSK/OOK transmitter for various,240 to 960 MHz wireless applications.
Reference: DWM15011301
Brand: Semtech
The RFM67W is a fully integrated transmitter which can operate in the 434MHz, 868MHz and 915 MHz licence free ISM bands.suited for the European (ETSI EN300-220-1), North American (FCC part 15.231, 15.247 and 15.249) and Japanese (ARIB T-67) regulatory standards.
Reference: DWM15011201
Brand: Semtech
The RFM68CW is an ultra-low-cost, FSK or OOK transmitter module suitable for operation in the 433, 868 and 915 MHz licence free ISM bands., the RFM68CW may be used without the requirement for configuration via an MCU. However, in conjunction with a microcontroller, the communication link parameters may be re-configured. Including, output power,...
Reference: DWM17080502
Brand: Semtech
RFM95TW 868MHz /915MHz with High Stability TCXO LoRa transceiver RF module feature the LoRa TM long range rf module,build by the semtech chipset with the application for LowWAN and ARM meters.
Reference: DWM15091402
Brand: Semtech
The RFM92W /RFM95W transceivers with 868 MHz and 915 MHz feature the LoRa TM long range rf module which core chipset are the semtech serice LoRa chipset,usually build for the ARM application.
Reference: DWM14033102
Brand: Semtech
The RFM96W / RFM98W 433MHz,470MHz transceivers feature the LoRaTM long range modem It's from the HopeRF LoRa module.build by the semtech chipset with the application for ARM meters.
Reference: DWM15081804
The CMT2250AW is HopeRF CMT single-chip, ultra low power and high performance device that consists of an OOK RF receiver, with 1920, 1527 and 2262 embedded data Decoder and 4 data output pins for various 300 to 480 MHz wireless applications.
Reference: DWM19072203
HP5806 is a miniaturized Digital Barometric Air Pressure Sensor with a high accuracy and a low current consumption, capable of measuring both pressure and temperature.
Reference: DWM16050801
HM-TRP series module is one of the hopeRF data link rf module with operating at 433MHz/868MHz/915 MHz and TTL/RS232/RS485 UI is a low cost, high performance transparent FSK transceiver.
Reference: DWM16110101
The HP203B is 24Bit Barometer sensor, employs a MEMS pressure sensor with an I2C interface to provide accurate temperature, pressure or altitude data.
Reference: DWM14120801
The RFM85W-433 is an Low cost ASK transmitter module .
Reference: DWM15011202
Brand: Semtech
The RFM68W is an ultra-low-cost, fully integrated FSK or OOK transmitter suitable for operation between 310 and 450 MHz, 860 and 870 MHz, as well as 902 and 928 MHz..The RFM68W offers integrated radio performance with cost efficiency and is suited for operation in North America FCC part 15.231, FCC part 15.247 DTS and FHSS modes, 15.249, and Europe EN 300...
Reference: DWM16092701
RFM98PW/ RFM95PW which are Enhanced Power Long Range Transceiver Module.the available versions is RFM98PW 433MHz, and 868MHz,915MHz for RFM95PW.
Reference: DWM15070101
The RFM219SW is an ultra low power, high performance, OOK and (G)FSK receiver for various 300 to 960MHz wireless applications.
Reference: DWM15081801
The CMT2110AW is HopeRF CMT Series ultra low-cost, highly flexible, high performance, single-chip OOK transmitter for various 240 to 480 MHz wireless applications.
Reference: DWM14120802
RFM83C/CL series is a low cost, high performance ASK/OOK receiver module.
HopeRF DK / EVB RFduino board which is compatible with Arduino UNO R3 and Arduino IDE.
