Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
WSS-05 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time which can work with WSC1-L or WSC2-LB weather station main processor.
WSS-05 is a 4-in-1 RS485 sensor that can monitor Temperature, Humidity, Illuminance, and Pressure at the same time.
WSS-05 is designed to support the Dragino Weather Station solution.
Users only need to connect the WSS-05 RS485 interface to WSC1-L, WSC2-LB. The weather station main processor WSC1-L, WSC2-LB can detect and upload environment Temperature, Humidity, Illuminance, and Pressure to the IoT Server via wireless LoRaWAN protocol.
Input Power: DC 12 ~ 24v
Interface: RS-485
Temperature Sensor Spec: Range:-30～70℃, resolution 0.1℃, Accuracy:±0.5℃
Humidity Sensor Spec: Range:0～100%RH,resolution 0.1%RH,Accuracy:3%RH
Pressure Sensor Spec: Range:10～1100hPa, Resolution:0.1hPa, Accuracy:±0.1hPa
Illuminate sensor: Range:0～2/20/200kLux, Resolution:10Lux, Accuracy3%FS
Working Temperature:-30℃～70℃
Working Humidity:10～90%RH
Power Consumption: 4mA @ 12v
RS485 Temperature, Humidity, Illuminance, Pressure sensor
Weather Station
User Manual Based on the WSC1-L
User Manual Based on the WSC2-LB
Reference: DWM22040502
WSC1-L Dragino Weather Station solution Main Process Unit can upload these sensor data to IoT server via LoRaWAN wireless protocol.
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM22091602
WSS-02 is a RS485 wind speed and wind direction monitor designed for weather station solution.
Reference: DWM23101801
WSC2-LB is the Main Process Unit for Weather Station solution which is full compatible with LoRaWAN Class C protocol, it can work with standard LoRaWAN gateway.
Reference: DWM25011501
The D20-NB and D20S-NB NB-IoT Temperature Sensors uplink methods including MQTT, MQTTs, UDP & TCP support BLE configure and OTA update, convert the Temperature reading to upload the sensor data sent to the IoT platform via the NB-IoT network.
Reference: DWM23070201
S31-LB is a LoRaWAN Temperature and Humidity Sensor with a SHT31 sensor probe based SN50v3-LB or LSN50V3 supports BLE configure and wireless OTA update.
Reference: DWM18103005
USD74/pcs MOQ100 The OLG01 is an Water proof outdoor setting open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
Reference: DWM23030701
MH-Z19E NDIR infrared gas module Built-in temperature compensation; and it has UART output and PWM output It uses the principle of non-dispersive infrared (NDIR) to detect CO2 in the air and has good selectivity. No oxygen dependence, long life, etc.
Reference: DWM25011401
SN50v3-NB is a Long Range NB-IoT Sensor Node based on the BC660K-GL model that supports uplink methods including MQTT, MQTTs, UDP & TCP. supports BLE configuration and OTA update supports uplinks to various IoT Servers.
Reference: DWM22110603
Recharge PCB Kit is Li-Ion Battery Charger which can be used for LSN50v2 & RS485-BL to replace the default one time battery and connect to solar panel.
Reference: DWM19090401
The Dragino LHT65 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor with an external sensor connector can be used for more than 10 years.
Reference: DWM22071401
The LPS8v2 is an open-source Debian system LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi , Ethernet and also with 4G Cellular Network capability.
Reference: DWM22082512
The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random channels which is fully compatible with RPi3B/3B+/4.
Reference: DWM22101701
DWM-M702 seven-in-one sensor module is a cost-effective digital serial port output sensor module, which adopts 485/UART output mode and integrates CO2, HCHO, TVOC,PM2.5,PM10, temperature and humidity.
Reference: DWM20090101
LoRa Antenna-BLG-AN-040-868MHz /915MHz Glass Fiber antenna for LoRaWAN Gateway LoRa IoT Application.
Reference: DWM23072303
The DDS04-LB is a LoRaWAN 4-Channels Distance Sensor upports BLE configure and wireless OTA update for Internet of Things solution. It is capable to add up to four Ultrasonic Sensors to measure four distances at the same time.
Reference: DWM25022201
The DDS45-LS solar-powered LoRaWAN Distance Detection Sensor can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity, and presence detection, intelligent trash can management system, etc.
Reference: DWM23061501
The PS-LB-T or PS-LB-I sensors are LoRaWAN Pressure Sensors for the Internet of Things solution. PS-LB can measure Air, Water pressure, and liquid levels and upload the sensor data via wireless to the LoRaWAN IoT server.
Reference: DWM22092804
WSS-04 is a RS485 rain / snow detect sensor. It can monitor Rain or Snow event. RS485 interface to WSC1-L. which can detect and upload the SNOW/Rain Event to the IoT Server via wireless LoRaWAN protocol.
Reference: DWM25022402
The DDS20-NB is an NB-IoT Ultrasonic liquid level sensor for the Internet of Things solution. It uses a non-contact method to measure the height of liquid in a container without opening it and send the IoT platform via the NB-IoT network.
WSS-05 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time which can work with WSC1-L or WSC2-LB weather station main processor.
