Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
ESP8266 Evaluation Board ESP-12 is full WIFI evalution board which mounted on a PCB with all the GPIO broken out,each GPIO has an LED connected so you can quickly test your code without connecting external hardware, and a LDR to test the ADC.
Reference: DWM14120901
Low cost ESP8266 ESP-01 Serial to WIFI Wireless Transceiver Module it's for Arduino,Raspberry Pi , AVR and ARM DK.
Reference: DWM15073001
Low cost DWM-ESP8266 ESP-02 Serial to WIFI wireless transceiver module with IPEX external antenna connector it's for Arduino,Raspberry Pi , AVR and ARM DK and widely used in networking, smart home project when it is connected to the wifi router.
Reference: DWM15073002
DWM-ESP8266 ESP-05 DIP package Serial to WIFI wireless transceiver module with IPEX external antenna connector it's for Arduino,Raspberry Pi , AVR and ARM DK and widely used in networking, smart home project when it is connected to the wifi router.
Reference: DWM15081902
Low cost DWM-ESP8266 ESP-05 Serial to WIFI wireless transceiver module with IPEX external antenna connector and chip anetnna it's for Arduino,Raspberry Pi , AVR and widely used in networking, smart home project when it is connected to the wifi router.
Reference: DWM15080504
Low Price ESP-12E ESP8266 Serial Wi-Fi Wireless Transceiver Module for Arduino / RPi Built-in Antenna.it's for Arduino,Raspberry Pi , AVR and widely used in networking, smart home,wifi router.
Reference: DWM18103005
USD74/pcs MOQ100 The OLG01 is an Water proof outdoor setting open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
Reference: DWM15092501
HI-Link HLK-SW16 16 Channel Android/Smart Phone CWiFi Relay /WiFi Relay Module with P2P Function.
Reference: DWM14032501
HLK-RM04 is Hi-Link low-cost embedded UART-ETH-WIFI converter module (serial port - Ethernet -Wireless network) you can take it as an ethernet wireless brige can used to be an wireless internet network and wifi router.
Reference: DWM17072503
ESP32S Wifi Bluetooth IOT wireless module which combined the WiFi 802.11b/g/n/e/i and Bluetooth v4.2 BR/EDR & BLE standard, providing a series of solutions of Wifi and Bluetooth to support open real-time operating systems (RTOS).
Reference: DWM14120901
Low cost ESP8266 ESP-01 Serial to WIFI Wireless Transceiver Module it's for Arduino,Raspberry Pi , AVR and ARM DK.
Reference: DWM17082402
WT8266-DK WiFi Module Development Kit for WT8266-S1&WT8266-S2 The test board can simulate serial devices to access WiFi network and implement the data transmission, meanwhile it can simulate working as the main control chip to access data of other devices and control
Reference: DWM19060502
The Dual Band Intel 9260AC 2.4G/5Ghz Wi-fi Bluetooth 5.0 moule for Laptop Windows 10 1.73Gbps Wireless 9260NGW NGFF Network Wifi Card For Intel ac 9260 2.4G/5Ghz 802.11ac Wi-fi Bluetooth 5.0 for Laptop Windows 10.
Reference: DWM23092701
WTLRC262-SG based on the Espressif ESP32-C2 and Semtech SX1262 chips. It can be used as a LoRa® terminal node. It supports communication functions of Wi-Fi, BLE, and LoRa.
Reference: DWM19060503
The Intel AX200 1730Mbps Dual Band 802.11ax Intel Wifi 6 AX200 NGW M.2 Wireless Wlan Wi-Fi Card Adapter For Intel AX200 With BT 5.0 MU-MIMO
Reference: DWM17072502
D-duino is a combination of ESP8266 and OLED is a 6 IOT WiFi NodeMCU Development Board .
Reference: DWM20030407
ESP8266 IOT Weather Station Kit with DHT11sensor UV sensor and water flow sensor IOT Weather Station Kit send the weather information with another ESP8266 module and display with an OLED kit.
Reference: DWM17082406
WT51822-S4AT nRF5182 BLE 4.1 Low Energy Bluetooth Module with PCB antenna high performance ,low power radio transmit and receive system module use Nordic BLE 4.1 nRF51822-QFAA as the controller chips.
Reference: DWM20030403
ESP32-A1S Wi-Fi+Bluetooth+Audio Development Kit it can work as a minimum independent system which offers support for Google’s Assistant and Amazon’s Alexa.
Reference: DWM20030402
EasyESP-1 WiFi-enabled ESP8266 microcontroller is a rapid prototyping and development board for the low-cost, specially designed for beginners.
Reference: DWM25042502
Alfa Networks AHPI7292S WiFi HaLow Pi Hat is compatible with the Raspberry Pi to be mounted on top of the Raspberry Pi, which can work with the RAK7391 IOT LoRaWAN Gateway Carrier Board.
Reference: DWM21030901
The WT-01F module core processor ESP8285 integrates the industry-leading Tensilica L106 ultra-low-power 32-bit micro MCU the main frequency supports 80 MHz and 160 MHz, and supports RTOS, Integrated Wi-Fi MAC/BB/RF/PA/LNA, external spring antenna.
ESP8266 Evaluation Board ESP-12 is full WIFI evalution board which mounted on a PCB with all the GPIO broken out,each GPIO has an LED connected so you can quickly test your code without connecting external hardware, and a LDR to test the ADC.
