- -$0.50

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Easy Pulse Plugin is an Arduino compatible and breadboard friendly pulse sensor based on the principle of photoplethysmography.
Reference: DWM14032106
The Arduino Uno Rev3 is a microcontroller board based on the ATmega328.
Reference: DWM16121103
Easy Pulse is a DIY pulse sensor that can be used for detecting the cardio-vascular pulse wave from a fingertip.
Reference: DWM17072503
ESP32S Wifi Bluetooth IOT wireless module which combined the WiFi 802.11b/g/n/e/i and Bluetooth v4.2 BR/EDR & BLE standard, providing a series of solutions of Wifi and Bluetooth to support open real-time operating systems (RTOS).
Reference: DWM16122005
This is a A6 GPRS/GSM Shield, which is use the newest A6 gprs/gsm module, A6 is a low-cost but efficient chip. With its ultra-small size, low power consumption and wide operating temperature range.
Reference: DWM25031103
The nRFLRCC68 module is a low-cost solution that integrates the function of Bluetooth 5.3, LoRa&LoRaWAN low-power Bluetooth, Bluetooth mesh network, NFC, Thread, and Zigbee.
Reference: DWM20030405
The RFM95W SX1276 LoRa IOT Development board for Raspberry Pi can be used in remote control, telemetry, remote communication equipment, robot control, wireless communications.
Reference: DWM25031402
The 32u4 LoRa Development kit with LoRa RFM95 IOT Board consists of the mega24u and the wireless transport module RFM95 is used in remote control, telemetry, remote communication equipment, robot control, and wireless communications.
Reference: DWM17080703
AM2321 is a temperature and humidity composite sensor that contains calibrated digital signal output, using special temperature and humidity sensor acquisition technology to ensure that products with high reliability and excellent long-term stability.
Reference: DWM20030407
ESP8266 IOT Weather Station Kit with DHT11sensor UV sensor and water flow sensor IOT Weather Station Kit send the weather information with another ESP8266 module and display with an OLED kit.
Reference: DWM20030402
EasyESP-1 WiFi-enabled ESP8266 microcontroller is a rapid prototyping and development board for the low-cost, specially designed for beginners.
Reference: DWM20030403
ESP32-A1S Wi-Fi+Bluetooth+Audio Development Kit it can work as a minimum independent system which offers support for Google’s Assistant and Amazon’s Alexa.
Reference: DWM16122102
NEO-6M-0-001 GPS Shield board is a cost-efficient and field-programmable gadget armed with a NEO-6M-0-001 and serial communication configuration.
Reference: DWM17080704
MTH02 Digital Temperature & Humidity Sensor is Japan's Hokuriku resistive humidity sensor production as a Temperature & Humidity sensor.
Reference: DWM25030701
The nRFLR1262 module integrates the Nordic nRF52840 microcontroller and the Semtech SX1262 LoRa transceiver chip supports Bluetooth 5.3 and low-power Bluetooth and complies with the A, B, and C classes of the LoRaWAN 1.0.3 specification. It also supports the LoRa point-to-point (P2P) communication mode.
Reference: DWM17072502
D-duino is a combination of ESP8266 and OLED is a 6 IOT WiFi NodeMCU Development Board .
Reference: DWM17072501
ESP8266 Evaluation Board ESP-12 is full WIFI evalution board which mounted on a PCB with all the GPIO broken out,each GPIO has an LED connected so you can quickly test your code without connecting external hardware, and a LDR to test the ADC.
Reference: DWM25031401
The LR1262 Development KIT uses RP2040 as the main control and is equipped with the LR1262 module that supports Lora and LoRaWAN protocols to help users realize LoRa and LoRaWAN applications.
Reference: DWM25031101
The nRFLR1110 module Integrates nRF52840 and LR1110 supports Bluetooth 5.3, LoRaWAN1.0.4, and built-in high-performance GNSS tracking function it also supports network protocols such as Bluetooth mesh, NFC, Threa,d, and Zigbee.
Easy Pulse Plugin is an Arduino compatible and breadboard friendly pulse sensor based on the principle of photoplethysmography.