Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
M1 Beacon Tag is an Ultra-thin Coin-size Bluetooth beacon with Additional Motion sensors available and Compatible with iBeacon and Eddystone (UID, URL, TLM). All the parameters of this product can be modified via configure APP.
Description
The M1 beacon is a short-range and portable tag with a 40 m range in the open space. However, the range can vary in different physical environments. The device belongs to ultra-low-power ARM® chipset NORDIC® nRF52 series. It is a round shape device with a 26 mm diameter and its maximum thickness is 7.10 mm.
The RFID beacon tags-based appliances are compatible with iOS 7.0+ and Android 4.3+ systems. All Bluetooth 5.0 devices support this tag beacon. The device comes with a superb quality replaceable C$2032 coin battery, which lasts about 15 months. And about the battery level information, you will be notified in real-time.
The RFID beacon tags’ devices are dependable and effective with very intuitive designs. Although the primary color of Bluetooth low-energy tag devices is white, the color is still customizable. We also offer custom configuration according to your needs, and the facility of imprinting companies’ logos is available.
With the device's net weight of 5.4 g. M1 beacons contain an onboard/ PCB Antenna with 50-ohm power, and it can transmit signals up to 40 m. These iBeacon tag devices are certified by FCC and CE. Our team is 24/7 ready for technical support, contact us now!
Bluetooth Low Energy
Ultra-low power consumption chipset nRF52 series
Support 5url broadcasting
Firmware update Over The Air (OTA)
Logo and color customizable (MOQ)
Provided with your configuration (MOQ 50 units)
100% Configurable Parameters via app (Android & iOS)
Size(H*W*L): ø26 * 6.85 mm
Battery Model: CR2032
Battery Capacity (mAh): 225mAh (replaceable)
Default Battery Life: 16 months
Battery replaceable: Yes
Max Range: 30m(+4dBm)
Waterproof: —
Protocols: iBeacon& Eddystone: UID, URL, TLM Eddystone Configuration GATT Service
Firmware updating: OTA
Attachment method: 3M double-sided sticker
Built-in Sensor: Motion LIS3DH
Addition Tech: RFID, RGB
Certification: CE & FCC
Reference: DWM22091301
The TrackerD is built-in with GPS, Wi-Fi, BLE, Temperature, Humidity, Motion Detection, and Buzzer which can use Arduino IDE to customize the software for IoT solution.
Reference: DWM22122301
The BCN02 is a Bluetooth BLE iBeacon designed for indoor positioning solution. BCN02 is base on Diglog IC and support Bluetooth 5.1 protocol. BCN02 is low power consumption and with 1200mAh battery. With a 500ms broadcast interval, BCN02 can works for 4～5 years.
Reference: DWM23103001
The DWM-LB-100 Solar Bluetooth Gateway is a device that integrates LoRa and Bluetooth 5.0 protocols to collect and transmit beacon data from nearby sources to a LoRa gateway.
Reference: DWM23122503
TrackerD-LS is an Open Source LoRaWAN Asset Tracker based on ESP32 MCU get the location data via GPS and set it to IoT server via LoRaWAN network. supports Motion Detection this feature will save power when no motion is detected.
Reference: DWM14072102
Low cost 125k ID card reader module,support EM/TK4001 or EM/TK4100 and compatible cards.
Reference: DWM25021802
M2 Asset Tracking Beacon is based on one Nordic nRF52832 SoC a professional-grade Bluetooth Low Energy (BLE) Beacon for asset tracking, proximity marketing, and indoor positioning. Configurable and durable.
Reference: DWM14072202
13.6MHz Mifare Modules,application for the fields of transport, access door control, smart meters, login in or login out checker, industrial.
Reference: DWM14072201
13.6MHz Mifare Modules,application for the fields of transport, access door control, smart meters, login in or login out checker, industrial.
M1 Beacon Tag is an Ultra-thin Coin-size Bluetooth beacon with Additional Motion sensors available and Compatible with iBeacon and Eddystone (UID, URL, TLM). All the parameters of this product can be modified via configure APP.
