Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
DR-TAH02 Bluetooth Sensor Tag work with BH01 BLE to LoRaWAN Hub
Bluetooth version: Bluetooth LE 5.1 protocol
Shell material: PET composite plastic bag (heat sealed)
Temperature range: -40°C ~ +85°C, ±0.3°C
Waterproof level: IP67
Battery capacity: 600mAh
Working temperature: -40°C ~ +60°C
Battery specifcation: CR2450
Data storage: 512 records
Battery life: 3 years (varies with the transmission powerand broadcast
frequency settings)
Transmit power: -19.5dBm ~ +2.5dBm (confgurable)
Broadcast frequency: 500ms (confgurable)
Sampling frequency: 5min/time (confgurable)
Broadcast power consumption: 22uA (varies with the transmission
power and broadcast frequency settings)
Broadcast mode: Custom Sensor broadcast
Broadcast distance Distance: 100m (varies with thetransmission
power setting)
Confguration APP: nRF connect (Android / IOS)
Reference: DWM22091301
The TrackerD is built-in with GPS, Wi-Fi, BLE, Temperature, Humidity, Motion Detection, and Buzzer which can use Arduino IDE to customize the software for IoT solution.
Reference: DWM22122301
The BCN02 is a Bluetooth BLE iBeacon designed for indoor positioning solution. BCN02 is base on Diglog IC and support Bluetooth 5.1 protocol. BCN02 is low power consumption and with 1200mAh battery. With a 500ms broadcast interval, BCN02 can works for 4～5 years.
Reference: DWM23122503
TrackerD-LS is an Open Source LoRaWAN Asset Tracker based on ESP32 MCU get the location data via GPS and set it to IoT server via LoRaWAN network. supports Motion Detection this feature will save power when no motion is detected.
Reference: DWM19060501
The Intel 9260AC adapter supports 1.73Gbps Wireless 9260NGW NGFF Network Wifi Card For Intel ac 9260 2.4G/5Ghz 802.11ac Wi-fi Bluetooth 5.0 for Laptop Windows 10.
Reference: DWM17082405
WT51822-S4AT nRF5182 BLE 4.1 Low Energy Bluetooth Module with PCB antenna high performance ,low power radio transmit and receive system module use Nordic BLE 4.1 nRF51822-QFAA as the controller chips.
Reference: DWM18010801
DWM-BTM01 Bluetooth 4.0 audio receiver module DIY Upgrade your old stereo speakers to stereo wireless speaker.
Reference: DWM19062801
ESP32-WROOM-32D and ESP32-WROOM-32U are powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding.
Reference: DWM18010803
HC-05 master-slave Bluetooth serial datalink module wireless serial communication from machine Wireless for arduino Bluetooth Module.
Reference: DWM18010802
DWM-BTM02 TDA2030A amplifier Bluetooth 4.0 audio receiver module Upgrade your old stereo speakers to stereo wireless speaker.
Reference: DWM14110208
Low cost HC-05 HC-06 Adapter Board for Bluetooth RS232 UART Converter Module.
Reference: DWM14112201
Low cost CC2540 /CC2541 BLE 4.0 Module the Second Generation bluetooth Module.
Reference: DWM25030701
The nRFLR1262 module integrates the Nordic nRF52840 microcontroller and the Semtech SX1262 LoRa transceiver chip supports Bluetooth 5.3 and low-power Bluetooth and complies with the A, B, and C classes of the LoRaWAN 1.0.3 specification. It also supports the LoRa point-to-point (P2P) communication mode.
Reference: DWM17082407
WT51822-DK BLE4.1 Development Kit for WT51822-S2/S4AT You can easily connect the Bluetooth module with PC through the XBee Adapt board.
Reference: DWM25042501
PCIE-M.2 WiFi6 AX210N Module for WLAN/ Bluetooth, which can work with the RAK7391 IOT LoRaWAN Gateway Carrier Board MiniPCIe Slot #3.
Reference: DWM14032903
JY-MCU HC-06 USB Bluetooth Wireless Module with CP2102 chip.It's bluetooth module to series RS232 can be an wireless converter board.
Reference: DWM19060503
The Intel AX200 1730Mbps Dual Band 802.11ax Intel Wifi 6 AX200 NGW M.2 Wireless Wlan Wi-Fi Card Adapter For Intel AX200 With BT 5.0 MU-MIMO
Reference: DWM25102204
DR-ES01 Bluetooth Sensor Tag work with BH01 BLE to LoRaWAN Hub.
Reference: DWM18050301
DWM-RAK813 LoRa and Bluetooth Module nRF52832 and LoRa SX1276 core chip which is a combination of the BLE and LoRa of the relay node module.
Reference: DWM14032906
HC-05 /HC-06 Bluetooth serial pass-through module wireless serial communication from machine Wireless HC-06 for arduino Bluetooth Module.
DR-TAH02 Bluetooth Sensor Tag work with BH01 BLE to LoRaWAN Hub
