Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The RAK3172-E is a Evaluation Board for RAK3172 Module It is based on RAK3372 WisBlock Core PCB which is compatible to the RAK19007 base board.
The RAK3172-E is a WisDuo Evaluation Board for RAK3172 Module that uses an STM32WLE5CC SoC chip. It is based on RAK3372 WisBlock Core PCB which is compatible to the RAK19007 base board. It provides an easy way to access the important pins of the RAK3172 module in order to simplify development and testing. It also allows you to connect other modules to the base board slots and build complete IoT project with the integrated connectors for battery and solar panel plus the on-board charging circuit. Its firmware is based on RAKwireless Unified Interface V3 (RUI3) that allows you create different functionalities using RUI APIs.
This module complies with Class A, B & C of LoRaWAN 1.0.3 specifications. It also supports LoRa Point to Point (P2P) communication mode which helps you in implementing your own customized long-range LoRa network quickly.
1pcs RAK3372 + 1pcs RAK19007
1pc Micro USB Cable
1pc SubG Antenna (iPEX)
2pcs 4-pin Header
14pcs Dupont Lines
Reference: DWM22022501
RAK7268 WisGate Edge Lite 2 Sx1302 Openwrt 8-channel indoor LoRaWAN gateway with built-in Ethernet and Wi-Fi connectivity supports LTE uplink communication connections (optional).
Reference: DWM22082505
RAK3172 based on STM32WLE5CC chip is a low-power long-range transceiver module for LoRa and LoRaWAN applications.
Reference: DWM22092602
This affordable kit features a selection of 13 different WisBlock IO and WisBlock Sensor modules.The WisBlock Kit is a complete set of all available WisBlock modules.
Reference: DWM23051901
RAK3272S Breakout Board is specifically designed to allow easy access to the RAK3172 low power long range LoRawan module the board in order to simplify development and testing.
Reference: DWM22121401
RAK7244 Raspberry Pi 4 option RAM for 2G,4G and 8G Based LoRaWAN Gateway RAK WisGate Developer D4 / D4+ / D4P RAK7244 / RAK7244C / RAK7244P.
Reference: DWM22082901
RAK Battery Plus is specially developed for the WisGate Edge Pro gateways. It will allow reliable outdoor deployment of the gateway in remote off-grid scenarios where the power is unreliable or inaccessible which is incorporating a solar charging system and status monitoring.
Reference: DWM23080101
The RAK Agriculture Kit with RAK5860 NB-IOT module Quectel BG77 with LoRaWAN, NB-IoT The Kit includes a range of sensors designed specifically for agriculture, including soil, light, and environmental sensors, as well as common interfaces like SDI-12, 4-20 mA, and RS485, providing a versatile platform for monitoring and controlling agricultural conditions.
Reference: DWM22062301
The LoRaWAN GNSS GPS Tracker is with a sensor to detect location change every set time interval and with solar panel built-in on the enclosure Use this kit for tracking and monitoring cargo, vehicles, and marine vessels.
Reference: DWM24081301
The Sensor Modules pack includes a range of sensors for sensing environmental conditions (temperature, humidity, barometer pressure, lighting), location and movement conditions (GNSS location, accelerometers, and movement detection), soil monitoring, and many more specific sensors (Radar, fingerprint, Infrared, UV, etc.).
Reference: DWM19030101
DWM-RAK7243 Pilot Gateway Pro Kit with Cellular & GPS modules for PoC Raspberry Pi 3B+, RAK2245 Pi HAT,RAK2013 Cellular Pi HAT.
Reference: DWM23070301
LoRaWAN Field Tester which helps to LoRaWAN network coverage it's easy to investigate whether the required area of sensor nodes is covered by gateways.
Reference: DWM25062601
The LRS10701-CPV0 by SENSO8 is an advanced indoor air quality (IAQ) monitoring device. The sensor monitors parameters such as temperature, humidity, PM1.0, PM2.5, PM10, CO2, TVOC, and other relevant parameters.
Reference: DWM20053101
Brand: Semtech
DWM-RAK4200 LPWAN Module includes an STM32L071 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 1.5uA in sleep mode and high LoRa® output power up to 19dBm max in work mode.
Reference: DWM25042503
PCIE-M.2 Mioty® 868 MHz Miro Edge Card on Mini PCIe, which can work with the RAK7391 IOT LoRaWAN Gateway Carrier Board MiniPCIe Slot #1, Slot #2, Slot #3.
Reference: DWM23080601
IOT Smart Biometric Monitoring Kit with RAK5860 NB-IOT module Quectel BG77 includes biometric sensors for monitoring heart rate and blood oxygen levels, as well as a non-contact body temperature sensor, providing valuable data for monitoring health and fitnes
Reference: DWM23080604
IoT Starter Kit with RAK5860 NB-IOT module Quectel BG77 including LoRaWAN, BLE, LTE-M/NB-IoT, and a range of different modules, including temperature/humidity, accelerometer, barometer, ambient light, and GPS. It also supports multiple outputs such as a buzzer, RGB LED, and I2C OLED.
Reference: DWM24060502
mPCIe to USB Board convert Board is suitable for quick prototyping or adding a LoRaWAN functionality to already existing equipment with a free USB port.
Reference: DWM18011801
DWM-RAK83 433MHz/ 868MHz/ 915MHz SX1301 LoRa/ LoRaWAN Gateway Module combine a host system like Raspberry Pi or WisAP(OpenWRT based) or WisCam to help you realize the whole Lora system development.
Reference: DWM22082502
RAK5146 is an LPWAN Concentrator Module with mini-PCIe form factor based on Semtech SX1303 and SX126X for Listen Before Talk feature, which enables easy integration into an existing router or other network equipment with LPWAN Gateway capabilities.
Reference: DWM23080102
The RAK Agriculture Kit with RAK13101 GSM module Quectel MC20CE with LoRaWAN, GSM The Kit includes a range of sensors designed specifically for agriculture, including soil, light, and environmental sensors, as well as common interfaces like SDI-12, 4-20 mA, and RS485, providing a versatile platform for monitoring and controlling agricultural conditions.
The RAK3172-E is a Evaluation Board for RAK3172 Module It is based on RAK3372 WisBlock Core PCB which is compatible to the RAK19007 base board.
