Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
DDS75-LB LoRaWAN Distance Detection Sensor, which supports BLE configuration and wireless OTA update, is a distance detection sensor that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
The Dragino DDS75-LB is a LoRaWAN Distance Detection Sensor for an Internet of Things solution. It is used to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
The DDS75-LB can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc.
It detects the distance between the measured object and the sensor, and uploads the value via wireless to the LoRaWAN IoT Server.
The LoRa wireless technology used in DDS75-LB allows the device to send data and reach extremely long ranges at low data rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
DDS75-LB supports BLE configuration and wireless OTA update, which makes user easy to use.
DDS75-LB is powered by an 8500mAh Li-SOCI2 battery, it is designed for long-term use up to 5 years.
Each DDS75-LB is pre-loaded with a set of unique keys for LoRaWAN registrations. Register these keys to the local LoRaWAN server, and it will auto-connect after power-on.
LoRaWAN 1.0.3 Class A
Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
Ultra-low power consumption
Distance Detection by Ultrasonic Technology
Flat object range 280mm - 7500mm
Accuracy: ±(1cm+S*0.3%) (S: Distance)
Measure Angle: 40°
Cable Length: 25cm
Support Bluetooth v5.1 and LoRaWAN remote configuration
Support wireless OTA update firmware
AT Commands to change parameters
Downlink to change the configuration
IP66 Waterproof Enclosure
8500mAh Battery for long-term use
Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~ 3.6v
Operating Temperature: -40 ~ 85°C
Frequency Range, Band 1 (HF): 862 ~ 1020 MHz
Max +22 dBm constant RF output vs.
RX sensitivity: down to -139 dBm.
Excellent blocking immunity
Li/SOCI2 un-chargeable battery
Capacity: 8500mAh
Self-Discharge: <1% / Year @ 25°C
Max continuous current: 130mA
Max boost current: 2A, 1 second
Sleep Mode: 5uA @ 3.3v
LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Horizontal distance measurement
Liquid level measurement
Parking management system
Object proximity and presence detection
Intelligent trash can management system
Robot obstacle avoidance
Automatic control, sewer
Bottom water level monitoring
1 x DDS75-LB
Dimensions and Weight:
Package Dimension: 150*120*55mm
Weight: 220g
XX: the default frequency band
EU433: Default frequency band EU433
CN470: Default frequency band CN470
EU868: Default frequency band EU868
IN865: Default frequency band IN865
KR920: Default frequency band KR920
AS923: Default frequency band AS923
AU915: Default frequency band AU915
US915: Default frequency band US915
Reference: DWM20022601
LSN50-V2 Waterproof Long Range Wireless LoRa Sensor Node with external antenna,It is designed for outdoor use and powered by Li/SOCl2 battery for long term use.
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM22071402
The LG308N is an open source Linux LoRaWAN Pico Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network.
Reference: DWM23050801
SN50V3-LB is the 3rd generation of the LSN50 series generic sensor node built with BLE support, OTA upgrade, and private LoRa protocol for easy maintenance.
Reference: DWM17102701
RF Explorer - ISM Combo Handheld Digital Spectrum Analyzer is a very affordable tool for work in all ISM popular frequency bands.
Reference: DWM25022501
The LDS12-LS is a Solar-powered LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor that can measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m).
Reference: DWM23072206
The MDS120-LB supports BLE configure and wireless OTA updateis more reliable for condensation / dusty environment to detect the distance between sensor and different objects.
Reference: DWM25030402
The CPL03-LB is a Solar-Powered LoRaWAN Contact Sensor that detects open/close status and uplinks to the IoT server via the LoRaWAN network. Users can see the dry contact status, open time, and open counts in the IoT Server.
Reference: DWM25021301
The D20-LS/ D20S-LS is a solar-powered LoRaWAN Temperature Sensor designed for waterproofing/Outdoor use or use in soil or on roads supports BLE configuration and wireless OTA update, making users easy to use.
Reference: DWM25022201
The DDS45-LS solar-powered LoRaWAN Distance Detection Sensor can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity, and presence detection, intelligent trash can management system, etc.
Reference: DWM25062901
The CS01-LB is a 4-channel current Sensor Converter. It can convert the reading from the current sensors and upload it to the IoT server via the LoRaWAN Network. It can be used to monitor the machine's running status and analyze power consumption trends.
Reference: DWM22110603
Recharge PCB Kit is Li-Ion Battery Charger which can be used for LSN50v2 & RS485-BL to replace the default one time battery and connect to solar panel.
Reference: DWM22071802
The LSN50v2-D23 is a LoRaWAN Temperature Sensor nodes with two sensor cable which are waterproof, moisture-proof and anti-rust for long-term usage . It can be used to measure the temperature of air, liquid or object.
Reference: DWM21051605
The LSPH01 LoRaWAN Soil pH Senso for IoT of Agriculture it is designed to measure the soil PH and soil temperature to analyze the soil acid or alkali level IP68 waterproof.
Reference: DWM25030301
The DS03A-LS is a Solar-Powered LoRaWAN Door Sensor It detects the door open/close status and uplinks to the IoT server via the LoRaWAN network. Users can see the door status, open duration, and open counts in the IoT Server.
Reference: DWM20061501
The Dragino LSE01 is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture. It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to LoRaWAN IoT Server.
Reference: DWM24011901
The LMS01-NB is a NB-IoT Leaf Moisture Sensor It is designed to measure the leaf moisture and temperature, so to send to the platform to analyze the leaf status such as: watering, moisturizing, dew, frozen.
Reference: DWM24011902
The AQS01-L is an Indoor LoRaWAN Air Quality Sensor designed to measure the surrounding environment parameters, including: CO2, Temperature, Relative Air Humidity, and Air pressure, and then upload to an IoT server via the LoRaWAN wireless protocol.
Reference: DWM22040501
The LPS8N is an open-source LoRaWAN Gateway which includes a SX1302/03 LoRa concentrator and has an optional cellular version that can provide 3G/4G connectivity to the internet.
Reference: DWM21010101
LBT1 is a Long Range / low power consumption LoRaWAN Bluetooth tracker. LBT1 scans and find the nearest i-Beacon info and send to IoT server via LoRaWAN wireless network.
DDS75-LB LoRaWAN Distance Detection Sensor, which supports BLE configuration and wireless OTA update, is a distance detection sensor that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
