- New

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
DWM-DE53LR is an external open-close transformer rail-type multifunctional anti-backflow meter based on Sub-1G(LoRaWAN Default) wireless transmission which is suitable for power monitoring of distributed photovoltaic grid-connected cabinets, power demand side management and other applications.
DWM-DE53LR is an external open-close transformer rail-type multifunctional anti-backflow meter based on Sub-1G(LoRaWAN Default) wireless transmission which is suitable for power monitoring of distributed photovoltaic grid-connected cabinets, power demand side management and other applications. It has the characteristics of no need to dismantle the busbar once, simple and convenient wiring, safe construction, and saves the transformation cost for users.
The device integrates the measurement of all power parameters and the function of power monitoring. In the meanwhile, there are RS-485 communication interface and Sub-1G(LoRaWAN Default) wireless communication interface for users to choose. It adopts the Modbus-RTU protocol to meet the needs of communication network management, and the remote on-off function of the circuit breaker switch can be implemented by the four relay outputs; It uses the OLED display interface to view and control parameter through the panel buttons. It is ideal for real-time power monitoring system and supports BLE near-field wireless communication function. It can connect devices through mobile phones to confi gure parameter and monitor real-time power parameter, which provides great convenience for on-site operation and maintenance and deployment.
Network Mode: three-phase and four-wire
Rated Voltage: 3L+N/400V AC
Voltage Range: 0.7~1.2Un
Input Frequency: 45Hz~65 Hz
Input Current: external transformer, 80A/120A/200A, default: 120A/40mA
Static Power: ≤10VA
Measurement Parameters: three-phase, each phase voltage/current/active power/
reactive power/power factor/frequency
Metering Method: four-quadrant electric energy metering
Measuring Accuracy: voltage\current level 0.5S, active power level 1, reactive
power level 2, frequency 0.05Hz
Calibration Output: open collector optical pulse output
Maximum Refresh Rate: 50ms, minimum transmission time <5ms
Built-in Clock: independent RTC real-time clock, with perpetual calendar and power-off protection expansion
Display Mode: 128x64 pixel OLED, QR code display, button operation
Switching Output :4 DO outputs, remote control
Wireless Communication: WiFi communication, data rate 54Mbps, IPv6 links, MQTT/TCP/UDP
Wired Communication: 1 channel RS-485, Modbus-RTU, max rate is 9600bps and max cable length is 1000m
Confi guration Method: WeChat mini program confi guration RS-485 and WiFi parameters and reading of electrical energy parameters via BLE
Firmware Maintenance: WiFi FOTA remote upgrade, BLE FOTA near-fi eld upgrade, Type-C local upgrade
Wide area network: Two options-Sub-1G(LoRaWAN Default)/Cat.1 LTE
Working Temperature: -10°C~+55°C(limit: -20°C~+65°C)
Storage Temperature:-45°C~+85°C
Relative Humidity: 5%~95%RH, no condensation
Altitude: <2500m
Transmission
Strong Penetration, 5-6 Walls
LoRa Private protocol
LoRaWAN standard protocol
Three Phase Voltage and Current; Total/Phase Active Power; Total/Phase Power Factor; Frequency; Total Active/Reactive Energy With a refresh rate of 100ms, it can quickly collect data
4-way 5A Relay Output
Used with AC Contactor
Remote Control of 4-way ON/OFF
Detects Current Flowing to the Grid and provides Data Feedback
Prevents excess Electricity from being fed into the Grid
Ideal for PV Monitoring Projects
Voltage/Current Accuracy of 0.5S grade
Active Power Accuracy of 1 grade
Reactive Power Accuracy of 1 grade
OLED x 1
2-way Interactive Buttons
4-way External Contactor Operation Buttons
4-way red LED Indicators for External Contactor Status
Rated Voltage: 3L+N/400V AC
Input Current: External Open-Type CT,
Input Current: 120A/40mA (CT)
Standard 3.5mm Rails Mounting
Dimensions: 98x72x65.5mm
Flame-retardant Plastic Housing
Double Insulation
Suction Cup Antenna
Easy monitoring and management of Large Building Electricity Consumption
Access to other gateways and servers are allowed(TTN/chirpstack)
Energy Management
Apartment Monitoring
Smart Campuses
Smart Buildings
PV Monitoring
Distribution Cabinet
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM22091301
The TrackerD is built-in with GPS, Wi-Fi, BLE, Temperature, Humidity, Motion Detection, and Buzzer which can use Arduino IDE to customize the software for IoT solution.
Reference: DWM23100501
LoRaWAN GPS Tracker kit with a sensor to detect location change every set time interval and with solar panel built-in on the enclosure Use this kit for tracking and monitoring cargo, vehicles, and marine vessels.
Reference: DWM23100901
RAK7289V2 WisGate Edge Pro Version 2 is an ideal product for IoT commercial deployment. With its industrial-grade components, it achieves a high standard of reliability.Supports 8 LoRa channels, multi backhaul with Ethernet, Wi-Fi, and Cellular connectivity.
Reference: DWM22102601
DWM-S90S series is based on SX1301+SX1255 chip combination, supports LoRaWAN standard protocol Class A/B/C equipment, has 8 uplink channels,1 downlink channel, the maximum transmit power is +27dBm, and the maximum receiving sensitivity is -140dbm.
Reference: DWM23102501
The DWM-DF12LD use LoRaWAN communication and it detect smoke generated during fire in time and issue an alarm in time report the fire alarm information to the intelligent fire monitoring platform in real time.
DWM-DE53LR is an external open-close transformer rail-type multifunctional anti-backflow meter based on Sub-1G(LoRaWAN Default) wireless transmission which is suitable for power monitoring of distributed photovoltaic grid-connected cabinets, power demand side management and other applications.