Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Low cost TT Motor Smart Car Robot Gear Motor for Arduino and robot and toys.
Motor parameters in detail:
1, there are two kinds of motor 1:48 (biaxial) and 1:12 0 (uniaxial) 3V speed 125 and 50, wheel speed are 48 and 15 respective
2, No load current (6 v) : 70 mA
3 (6 v), Maximum torque: 5500 g * cm
4, size: 70.50 mm x 27.00 mm x 23.00 mm (length x width x height)
5, weight, size: 40 g
6, working voltage: 3-6 v
Packing list:
6v gear motor: 1pcs
65 mm wheel: 1pcs
Reference: DWM14032106
The Arduino Uno Rev3 is a microcontroller board based on the ATmega328.
Reference: DWM14123001
The Balanbot is a Arduino Based Self-balancing Robot Kit.It's Open Source and easy to assemble.
Reference: DWM15090901
DWM-2WD Smart Car Kit is an kit base on the Arduino UNO with Bluetooth Control.
Reference: DWM14032906
HC-05 /HC-06 Bluetooth serial pass-through module wireless serial communication from machine Wireless HC-06 for arduino Bluetooth Module.
Reference: DWM17031001
DWM-PM-8 50uA Lowest standby Current 0.18s to 300s Delay Time Mini Infrared PIR module with LDR work mode.
Reference: DWM15081805
The CMT2251AW is a HopeRF CMT single-chip, ultra low power and high performance device that consists of an OOK RF receiver, with 1920, 1527 and 2262 data decoder and 1 PWM output pin for various 300 to 480MHz wireless applications.
Reference: DWM16120602
DWM-H34B 315MHz /433MHz is a tunning free,Low cost Well integrated ASK /OOK Transmitter RF module.Power supply range is 2V-4.2V is better for CELL Coin battery.
Reference: DWM15080601
DWM-X9C104 digital potentiometer module it‘s for adjust the bridge circuit balance when the potentiometer is vibration, shock, temperature, humidity and so on the external environment factors.
Reference: DWM14120802
RFM83C/CL series is a low cost, high performance ASK/OOK receiver module.
Reference: DWM14072303
ProtoShield PCB for SOP16 /SSOP16 and the lead pitch are 1.27mm(Front) and 0.65mm(Back).
Reference: DWM15100303
Rf coaxial connector SMA male to two female connector sma one point two wholesale.
Reference: DWM21032105
DWM-N620 TI CC1310(or CC1312R,CC1312R7)+CC1190 868MHz /915MHz 27dBm Enhance power SOC RF Transceiver module design consists of a SOC chip and CC1190 PALAN RF chip.
Reference: DWM14121903
Cooperkit Buzzer is connected to the digital I / O port, when the output is low, buzzer will give a long sound. If it is connected to an analog pulse width modulation (PWM) output , the buzzer can produce a variety of tones, which can be made into the speaker of electronic organ.
Reference: DWM141211LA
Low cost 315 /433MHz ASK /OOK RF transmitter and receiver kit for Arduino project.
Reference: DWM15100309
SMA Male to MCX male 50ohm Rf coaxial connector Switch wiring RG316 extension jumper cable and wire length which can be customized.
Reference: DWM14120602
DWM2400-XP1M, a sucker wireless antenna, is designed for 2.4GHz wireless communication system. It is of good VSWR, ingenious structure, easy installation, and stable performance, with good anti-vibration and anti-aging ability.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM15081804
The CMT2250AW is HopeRF CMT single-chip, ultra low power and high performance device that consists of an OOK RF receiver, with 1920, 1527 and 2262 embedded data Decoder and 4 data output pins for various 300 to 480 MHz wireless applications.
Reference: DWM14052901
Atmel® AVR® XMEGA® microcontrollers deliver the best possible combination of real-time performance, high integration and low power consumption for 8/16-bit MCU applications.
Low cost TT Motor Smart Car Robot Gear Motor for Arduino and robot and toys.
