Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
On Sale is a 25mm OD 3K twill-weave Carbon fiber tube with 1mm,2mm, and 3mm Thickness as optional as a typical application of UAV.
Carbon fiber tubes, also known as carbon fiber pipes, carbon tubes, or carbon fiber tubes, are made by pre-impregnating carbon fiber composite materials into a polyphenylene vinylene resin and then heat-curing and extruding (twisting). During the manufacturing process, various profiles can be produced using different molds, such as carbon fiber round tubes, square tubes, sheets of different specifications, and other profiles. The production process can also include surface decoration with 3K wrapping.
OD: 25mm (also acceptable with Customize from minimum 6mm to maximum 118mm)
Surface: 3K twill weave (also acceptable with Customize for plain weave, glossy/matte)
Thickness(optional): 1mm,2mm,3mm (also acceptable with Customize)
Shapes: round tubes (also accept with Customize for Square tubes, hexagonal tubes, special-shaped tubes, etc.)
Lightweight, high strength, corrosion resistance. Good dimensional stability, flame retardant, aesthetically pleasing, easy maintenance, UV resistant, not prone to aging, and other advantages.
They are used for stunt kites, 468 multi-axes, mechanical equipment, drones, plant protection machines, flying models, various tool rods/sports, and leisure products.
If there is any requirement for customizing the OD size Thickness, Surface type, and Shape type.
Pls, send us an email at sales@dwmzone.com.
Reference: DWM22100202
High power 1W, long distance transmission, frequency range 902-928mhz, Microhard P900 core module manufacturer's nominal distance is 60 kilometers.
Reference: DWM24052901
IKUN20 DJI o3 AIR UNIT HD VTX Drone is equipped with an ELRS 2.4GHz Receiver for easy installation and maintenance. With a stable stack featuring 11066000KV + D51 -5, it ensures flight stability and a smoother experience.
Reference: DWM24060301
1.2/ 1.3GHz 100mW wireless audio and video transmitter receiver module with the wire connector interface Red: Power Supply (3.7-5V). Black: GND. Yellow: Video. White: Audio (5.5M).
Reference: DWM24070201
On Sale is a 16mm OD 3K twill-weave Carbon fiber tube with 2mm,3mm4mm,6mm Thickness as option as a typical application of UAV.
Reference: DWM22100201
Microhard P900 - Miniature Mesh 1W 900 MHz Wireless Modem use for Utility Meters, Remote Telemetry, Electric, Oil, and Gas Sensors/Detection.
Reference: DWM15123001
Brand: Semtech
HM-TRLR-S series are operating at 433MHz, 868MHz, 915MHz low cost, high performance transparent transceiver with LoRa/FSK/ GFSK/OOK modulation variety.It's mainly use for uav controller and drone data link.
Reference: DWM24070401
On Sale is a 20mm OD 3K twill-weave Carbon fiber tube with 2mm,3mm,6mm, and 10mm Thickness as optional as a typical application of UAV.
Reference: DWM24062701
RYLR998 with UART Interface can work at 868/915 MHz LoRa® Antenna Transceiver Module which provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
Reference: DWM18120403
Brand: Semtech
RYLR896 868MHz, 915MHz high performance transparent transceiver with LoRa/FSK/ GFSK/OOK modulation variety.It's mainly use for uav controller and drone data link.
Reference: DWM24052001
The ZED-F9P development board is suitable for various industry applications such as research and development projects, drones, unmanned boats, autonomous driving, robots, driving schools, surveying and mapping, precision agriculture, ext.
Reference: DWM18120404
Brand: Semtech
RYLR406 433MHz, 470MHz high performance transparent transceiver with LoRa/FSK/ GFSK/OOK modulation variety.It's mainly use for uav controller and drone data link.
Reference: DWM24070201
On Sale is a 16mm OD 3K twill-weave Carbon fiber tube with 2mm,3mm4mm,6mm Thickness as option as a typical application of UAV.
Reference: DWM22100202
High power 1W, long distance transmission, frequency range 902-928mhz, Microhard P900 core module manufacturer's nominal distance is 60 kilometers.
Reference: DWM24060301
1.2/ 1.3GHz 100mW wireless audio and video transmitter receiver module with the wire connector interface Red: Power Supply (3.7-5V). Black: GND. Yellow: Video. White: Audio (5.5M).
Reference: DWM24052901
IKUN20 DJI o3 AIR UNIT HD VTX Drone is equipped with an ELRS 2.4GHz Receiver for easy installation and maintenance. With a stable stack featuring 11066000KV + D51 -5, it ensures flight stability and a smoother experience.
On Sale is a 25mm OD 3K twill-weave Carbon fiber tube with 1mm,2mm, and 3mm Thickness as optional as a typical application of UAV.
