- New

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM15010504
Brand: Semtech
The RFM69CW /RFM69HCW are built in by SX1231and SX1231H which is ISM Free band transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The LoRaWAN-based GPS Tracker is with a sensor to detect location change every set time interval and with solar panel built-in on the enclosure Use this kit for tracking and monitoring cargo, vehicles, and marine vessels.
This kit is a GPS tracker with a sensor to detect location change every set time interval. Optional battery backup ( battery not included ) with solar panel built-in on the enclosure is used for recharging to ensure uninterrupted data transmission. Possible applications are tracking of cargo, vehicles, and vessels for marine traffic.
Setup: Localization data are acquired with a GPS module and the location information is sent to a LoRaWan® server when the sensor changes location.
LoRa® -based GPS Tracker with Solar Panel.
This Kit is a GPS tracker with a sensor that can be used to detect the change of location for a set time interval. Use this kit for tracking and monitoring cargo, vehicles, and marine vessels. The localization data acquired using the GPS module and the location information is sent to a LoRaWAN server when the sensor changes location.
This Kit is encased in a sturdy box with the option to connect a battery, which can be recharged with the included solar panel. This is to make sure that data transmission is not interrupted. Please take note that the battery is not included in the package due to strict shipping regulations.
Easy Plug'n'Play slots for WisBlock Core MCU, WisBlock Sensor, and WisBlock IO modules
Small form factor
Supports 3 different power supply sources
Optimized for low power consumption applications
I2C, UART, GPIO's an analog input accessible with solder contacts
2 user-definable LED's
Reset button
USB debug port
1 slot for WisBlock Core MCU
4 slots for WisBlock Sensor sensor modules
1 slot for WisBlock IO extension modules
LoRaWan® 1.0.2 protocol stack (supports Class A & C)
Bluetooth Low Energy 5.0 protocol stack
Nordic nRF52840
Wide range of connections
Semtech SX1262
Using the ST LIS3DH acceleration sensor
Low power consumption
Small form factor
User-selectable scales of ±2g/±4g/±8g/±16g
Data acquisition rates from 1Hz to 5.3kHz.
Internal buffer for 32 levels of 16-bit data
Using the U-Blox MAX-7Q GPS module
GNSS support for GPS/QZSS and GLONASS
Low power consumption
Small form factor
Fast location fix.
High accuracy of 2.5m
10Hz update rate
1 m/s velocity accuracy
5 degrees Heading accuracy
RAK5005-O
RAK4631
RAK1904
RAK1910
RAKBox-B2
LoRa Antenna
BLE Antenna
GPS Antenna
Software Example Code
Documentation
Reference: DWM22021701
RAK7268 WisGate Edge Lite 2 Sx1302 Openwrt 8-channel indoor LoRaWAN gateway with built-in Ethernet and Wi-Fi connectivity supports LTE uplink communication connections (optional).
Reference: DWM22061402
The RAK4630 is a low-power long-range transceiver module based on Nordic nRF52840 MCU that supports Bluetooth 5.0 (Bluetooth Low Energy) and the newest SX1262 LoRa transceiver from Semtech.
Reference: DWM22061601
RAK10700 is a GNSS Tracker device with a GNSS modem providing LPWAN and BLE communication using the nRF52 MCU and SX1262 LoRa transceiver of the RAK4631 Core module.
Reference: DWM22062201
LoRaWAN Development kit with NB-IOT and WIFI and all kinds of sensor Create IoT applications for different solutions, like environmental sensing, agriculture solutions, GPS trackers.
Reference: DWM20061502
The LWL01 is a LoRaWAN Water Leak Sensor. It detects the water leak status and will send periodically data every day as well as for water leak event. It also count the water leak event times and also calculate last water leak duration.
Reference: DWM18110502
LT-33222-L is The Dragino LT series I/O Modules are Long Range LoRa I/O Controller designed to simplify the installation of I/O monitoring.
Reference: DWM21051601
The LWL02 is a LoRaWAN Water Leak Sensor. It build in SX1262 can indicates a water leak event and uplink to IoT server via LoRaWAN network 2 x AAA batteries which can work in 2 ~ 10 years battery life.
Reference: DWM18122202
Free Shipping The LG01-P is an open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
Reference: DWM22061404
The breakout board footprint is based on XBee form factor and its main purpose is to allow the RAK3172 stamp module pins to be transferred to 2.54 mm headers.
Reference: DWM19011501
Free Shipping The LG01-N is an open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
Reference: DWM20052801
The DWM-RAK7204 is an LPWAN node that serves as an environmental monitoring station. The high-precision sensors, can measure changes in temperature, humidity, gas pressure and provide an indoor air quality index.
Reference: DWM19121101
ATmega328P LoRa Radio Node is based on SX1276/SX1278 which use the Arduino pro mini 8Mhz 3.3V bootloader, usage same as the Arduino pro mini.
Reference: DWM17111103
MS14N-P Linux IoT / VoIP Appliance Without Sensor Terminal is to solve the connectivity problem and greatly enhance micro-controller products such as the Arduino.
Reference: DWM18122203
Free Shipping LSN50 - Waterproof Long Range Wireless LoRa Sensor Node is an open source product, it is based on the STM32Cube HAL drivers and lots of libraries can be found in ST site for rapid development.
Reference: DWM20072901
The DLOS8 Outdoor LoRaWAN Gateway includes 1pcs SX1301 and 2pcs SX1257 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM21072701
The LSN50V2-S31B is LoRaWAN Temperature & Humidity Sensor node be used to measure the surrounding environment temperature and relative air humidity for IoT solution.
Reference: DWM21010101
LBT1 is a Long Range / low power consumption LoRaWAN Bluetooth tracker. LBT1 scans and find the nearest i-Beacon info and send to IoT server via LoRaWAN wireless network.
Reference: DWM21031101
The SenseCAP LoRaWAN Air Temperature and Humidity Sensor node built-in LoRa transmitter based on SX1276 chipset for smart agriculture, precision farming, and smart city outdoor used IoT application.
Reference: DWM18122305
The Lora/GPS_HAT is an expension module for LoRaWan for using with the Raspberry Pi.This product is intended for those interested in developing LoRaWAN solutions which is based on the SX1276/SX1278 transceiver.
Reference: DWM19062801
ESP32-WROOM-32D and ESP32-WROOM-32U are powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding.
The LoRaWAN-based GPS Tracker is with a sensor to detect location change every set time interval and with solar panel built-in on the enclosure Use this kit for tracking and monitoring cargo, vehicles, and marine vessels.