Код: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged.
Код: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Код: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Код: DWM14042401
SMA RG178 extension cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Код: DWM15101001
Бренд: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Banner
The TH02 is a digital relative humidity and temperature sensor. This monolithic CMOS IC integrates temperature and humidity sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
UseFul Link: TH02 Demo Code.
Datasheet: TH02.
Description
The TH02 is a digital relative humidity and temperature sensor. This monolithic CMOS IC integrates temperature and humidity sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C host interface. The patented use of industry-standard, low-K polymeric dielectrics for sensing humidity enables the construction of a low-power, monolithic CMOS sensor IC with low drift and hysteresis and excellent long term stability.
Both the temperature and humidity sensors are factory-calibrated and the calibration data is stored in the on-chip non-volatile memory. This ensures that the sensors are fully interchangeable, with no recalibration or software changes required.
Features
Relative Humidity Sensor
.± 4.5 % RH (maximum @ 20–80% RH)
Temperature Sensor
.±0.5 ºC accuracy (typical)
.±1 ºC accuracy (maximum @ 0 to 70 °C)
0 to 100% RH operating range
–40 to +85 ºC (GM) or 0 to +70 ºC
operating range (FM)
Wide operating voltage range (2.1 to 3.6 V)
Low Power Consumption
.240 µA during RH conversion
I2C host interface
Integrated on-chip heater
Excellent long term stability
Factory calibrated
Optional factory-installed cover
.Low-profile
.Protection during reflow
.Excludes liquids and particulates (hydrophobic/oleophobic)
Applications
.Industrial HVAC/R
.Thermostats/humidistats
.Respiratory therapy
.White goods
.Micro-environments/data centers
.Automotive climate control and de-fogging
.Asset and goods tracking
Код: DWM14032106
The Arduino Uno Rev3 is a microcontroller board based on the ATmega328.
Код: DWM14103102
DWM-DHT11 Digital Humidity Temperature Sensor for Arudino.
Код: DWM14120304
DHT22 AM2302 Low cost Digital Temperature And Humidity Sensor Replace SHT11 SHT15.
Код: DWM17111902
The HP203B / HP206C are 24Bit Barometer sensor, employs a MEMS pressure sensor with an I2C interface to provide accurate temperature, pressure or altitude data.
Код: DWM17111903
The HP203B / HP206C are 24Bit Barometer sensor, employs a MEMS pressure sensor with an I2C interface to provide accurate temperature, pressure or altitude data.
Код: DWM18121801
The TH02 is a digital relative humidity and temperature sensor. This monolithic CMOS IC integrates temperature and humidity sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
Код: DWM14103102
DWM-DHT11 Digital Humidity Temperature Sensor for Arudino.
Код: DWM18121803
The TH02 is a digital relative humidity and temperature sensor. This monolithic CMOS IC integrates temperature and humidity sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
Код: DWM14120304
DHT22 AM2302 Low cost Digital Temperature And Humidity Sensor Replace SHT11 SHT15.
Код: DWM14101903
Low cost DWM-FC-28 Soil Humidity Detection Sensor Module can be used to detect soil moisture.
The TH02 is a digital relative humidity and temperature sensor. This monolithic CMOS IC integrates temperature and humidity sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
