Код: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged.
Код: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Код: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Код: DWM14042401
SMA RG178 extension cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Код: DWM15101001
Бренд: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Banner
The Arduino Uno Rev3 is a microcontroller board based on the ATmega328.
The Arduino Uno Rev3 is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as a USB-to-serial converter."Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0.
The Uno and version 1.0 will be the reference versions of Arduno, moving forward. The Uno is the latest in a series of USB Arduino boards, and the reference model for the Arduino platform.
Microcontroller ATmega328
Operating voltage 5V
Input voltage (recommended) 7-12V
Input voltage (limits) 6-20V
Digital I/O pins 14 (of which 6 provide PWM output)
Analog input pins 6
DC current per I/O Pin 40 mA
DC current for 3.3V Pin 50 mA
Flash memory 32 KB of which 0.5 KB used by bootloader
SRAM 2 KB
EEPROM 1 KB
Clock speed 16 MHz
Код: DWM14032904
JY-MCU 8/16 bite LED digital tube display module, can cascade and extend the display module, LED, arduino.
Код: DWM14041802
HopeRF DK / EVB module kits with number kinds of module which will plug into the DK & EVB board.
Код: DWM14070801
RFduino board which is compatible with Arduino UNO R3 and Arduino IDE.
Код: DWM14102402
Low cost and New Dual H Bridge DC Stepper Motor Drive Controller Board Module L298N for Arduino.
Код: DWM14102403
Low cost 2 -way 5V/3.3V DWM-XD-42 Breadboard dedicated power module.
Код: DWM14102404
Low cost GY-273 HMC5883L Module Triple Axis Compass Magnetometer Sensor.
Код: DWM14080702
The Bluetooth Shield integrates a Serial Bluetooth module included Bluetooth 2.0 or Bluetooth 4.0.
Код: DWM14051501
Mega 2560 R3, Mega2560 REV3 ATmega2560-16AU Board + USB Cable compatible for arduino.
Код: DWM14032905
JY-MCU 8 (digital tube + keys + two-color LED module) - Driver IC TM1638, red & green digital tube.
Код: DWM15080501
DWM-DS3231 is high precision Real Time Clock Module For Arduinowhich equipped with integrated TCXO and crystal.
Код: DWM14032904
JY-MCU 8/16 bite LED digital tube display module, can cascade and extend the display module, LED, arduino.
Код: DWM14080701
Arduino W5200 Ethernet Shield with Micro SD card socket and RJ45 Enthernet jack.
Код: DWM14080703
GPRS GSM Shield for Arduino,it delivers GSM/GPRS 850/900/1800/1900MHz signals for Audio, SMS and GPRS Service.
The Arduino Uno Rev3 is a microcontroller board based on the ATmega328.
