Please be aware that this product does not support the Helium LongFi network. Kindly note that products that are free from any quality defect are not eligible for return and refund.
Among the first launch of Seeed industrial IoT (IIoT) product series, SenseCAP is focusing on wireless environmental sensing applications: smart agriculture, precision farming, and smart city, to name a few. It consists of hardware products (sensors, data-loggers & gateways, etc.), software services (SenseCAP portal, mobile App, open dashboard), and API for device & data management.
SenseCAP Gateway - LoRaWAN is based on LoRaWAN protocol, applicable for low-power consumption, long-range environmental data collection, and remote monitoring scenarios such as smart agriculture and smart city.
As the central device of SenseCAP LoRaWAN network, the gateway is used for collecting data from different SenseCAP Sensors and transmit the data to the cloud platform via cellular LTE or Ethernet. Equipped with a high-performance processor AM3358 and telecom-operator-level LoRa chip SX1301, this device ensures robustness and high performance in large-scale networks. Mutual authentication and encryption are established in the whole network to increase security.
The gateway is designed with an IP66 enclosure and supports an extended operating temperature range, making it suitable for industrial applications in both indoor and outdoor severe environments.
We offer different SenseCAP Gateway - LoRaWAN with different ISM bands:
SenseCAP Gateway - LoRawan 868MHz ( subset of 863 - 870 MHz )
SenseCAP Gateway - LoRawan 915MHz ( subset of 902 - 928 MHz )
High-performance Cortex A8 1GHz processor, Linux system.
Support LoRaWAN protocol Class A, support ultra-low-power SenseCAP Sensor
Support 8 RX, 1 TX transceiver, maximum transmit power 27dBm
Support multiple ISM bands: CN470, EU868, US915
Support multiple methods to access the network: 4G, Ethernet
Ultra-wide-distance transmission: 10km in line of sight scene, 2 km in urban scene
Industrial grade protection: IP66 enclosure, temperature -40℃~70℃, suitable for outdoor applications
Easy deployment, and rapid provisioning (see the "how to install" video below)
Other Wireless Sensing Applications
||LoRa-G-E/4G(868MHz or 915MHz)
||TI AM3358 Cortex-A8 1GHz
|LoRa Power Output
||100Mbps FE (RJ-45)
Support non-CA Cat 4 FDD and TDD
LTE-FDD: Max 150Mbps (DL), Max 50Mbps (UL)
LTE-TDD: Max 130Mbps (DL), Max 30Mbps (UL)
Support 3GPP R8 DC-HSDPA, HSPA+, HSDPA, HSUPA and WCDMA
DC-HSDPA: Max 42Mbps (DL) HSUPA: Max 5.76Mbps (UL)
WCDMA: Max 384Kbps (DL), Max 384Kbps (UL)
2.5dBi gain / Vertical polarization / Omni-directional / SMA-J connector
0-4dBi gain / Linear polarization / Omnidirectional / SMA-J connector
||Indicating network condition (online/ offline)
||Reserved 1 screw hole for GND
||anti-aging (from rain/sun exposure): UL746C F1
||-40 ℃ to +70 ℃
||0 to 100 %RH (non-condensing)
||Wall or pole mounting
||256mm * 160mm * 81mm
||CE, FCC, RoHS
||Allen Hex Key
||Power Extension Cable (5M)
||M5 Self-drilling Screws
Please choose the corresponding frequency according to regional regulation.
SenseCAP mobile APP and SenseCAP Portal are provided to enable easy and efficient provisioning and management of devices & data at scale.
SenseCAP API is provided to access data and devices for further development.
Here is a collection of SenseCAP LoRaWAN sensors for you to use with SenseCAP LoRaWAN Gateway seamlessly without extra workload for provisioning. It only takes you a few minutes to set up with this instruction.
If you want to add other LoRaWAN sensors, no problem at all. Please kindly refer to this document to connect any LoRaWAN sensors to SenseCAP LoRaWAN Gateway.