Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
BPI-R3 Router board with MediaTek MT7986(Filogic 830) quad core ARM A53 + MT7531A chip design ,2G DDR RAM ,8G eMMC flash onboard, it is a very high-performance open-source router development board, support Wi-Fi 6/6E 2.4G Wi-Fi use MT7975N and 5G Wi-Fi use MT7975P, support 2 SFP 2.5GbE port, and 5 GbE network port.
The MT7986(Filogic 830) integrates four Arm Cortex-A53 cores up to 2GHz with up to 18,000 DMIPs of processing power and 6Gbps of dual 4x4 Wi-Fi 6/6E connectivity. It has two 2.5g Ethernet interfaces and serial peripheral interfaces (SPI). Filogic 830‘s built-in hardware acceleration engine enables fast and reliable Wi-Fi offloading and wireless network connection. In addition, the chip supports MediaTek Fast Path™ technology, which is suitable for games, AR/VR and other low-latency applications.
Wi-fi 6E has many advantages over its predecessors, including lower latency, larger bandwidth capacity and faster transmission rates. Wireless network devices supporting the 6GHz band mainly use 160MHz wide channel and 6GHz uncongested bandwidth to provide multigigabit transmission and low-latency wi-fi connection, providing reliable wireless network for streaming media, games, AR/VR and other applications.
. MediaTek MT7986(Filogic 830) Quad core ARM Cortex A53+MT7531 chip design
. Wi-Fi 6/6E 4x4 2.4G Wi-Fi (MT7975N) +4x4 5G Wi-Fi (MT7975P)
. 2G DDR RAM
. 8G eMMC flash
. 2 SFP 2.5GbE
. 5 GbE network port
. POE support (optional)
. Mini PCIe via USB
. M.2 KEY-E PCIe interface
. Micro SD card interface
. 26 PIN GPIO
. Internet service Router
. Wireless Router
. Wireless Repeater
. Home security Gateway
. Home Automation
. Nass device
. Network and communication applications
Reference: DWM22090901
Raspberry Pi 4 Model B Broadcom BCM2711 2GB, 4GB or 8GB LPDDR4-3200 SDRAM available dual-band 2.4/5.0 GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capability.
Reference: DWM22090802
Raspberry Pi 3 Model B+ boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT.
Reference: DWM22091001
CM4 Raspberry pi Computer module 4 with wireless check out the full range of Compute Modules 4.
Reference: DWM22051402
Raspberry Pi cluster board a standard size mini-ITX board to be put in a case with up to 6 RPI CM4 Compute Modules.
Reference: DWM16092702
The Lora/GPS_HAT is an expension module for LoRaWan for using with the Raspberry Pi.This product is intended for those interested in developing LoRaWAN solutions which is based on the SX1276/SX1278 transceiver.
Reference: DWM22051402
Raspberry Pi cluster board a standard size mini-ITX board to be put in a case with up to 6 RPI CM4 Compute Modules.
Reference: DWM22101302
433MHz 8W amplifier Board is high Efficiency for data transmission, flight control, extended range RF power amplification.
Reference: DWM22090901
Raspberry Pi 4 Model B Broadcom BCM2711 2GB, 4GB or 8GB LPDDR4-3200 SDRAM available dual-band 2.4/5.0 GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capability.
Reference: DWM22072501
LILYGO 3.71 inch ink screen with touch can be used as a Raspberry Pi expands the module, and the corresponding pin-out interface is designed to adapt to the Raspberry Pi.
Reference: DWM15110403
Raspberry Pi 2 Model B ARM Cortex - A7 Quad Core CPU 900MHz 1GB RAM 4 USB ports Project Board for Learner.
Reference: DWM22083001
SI4732-Radio-ESP32-2.8 inch TFT Touchscreen-Arduino Si4732 chip all Band Radio DSP Receiver FM LW SSB 2.8 inch Big Touch Screen PAM8406 HiFi Headphone Amp.
Reference: DWM23041902
ArduPico is An Arduino-style Carrier board which compatible Raspberry Pi Pico/Pico H/Pico W/Pico WH.
Reference: DWM22101001
HDMI to CSI-2 Adapter Board built by TC358743XBG is an HDMI to CSI-2 camera port adapter designed for Raspberry Pi with up to 1080p@30fps support.all versions of Raspberry Pi series boards are supported.
Reference: DWM22091205
CM4 Raspberry pi Computer module 4 without wireless check out the full range of Compute Modules 4.
Reference: DWM22090802
Raspberry Pi 3 Model B+ boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT.
Reference: DWM22081701
HNT SNR full frequency transmitter is to simultaneously transmit the weak dynamic interference energy of 8 witness bands of helium to suppress the SNR value of HNT miner witness, further improve the authenticity of SNR simulation, reduce the probability of blacklisting.
Reference: DWM18021501
37 sensor modules In 1 Sensor Kits great package for Arduino Raspberry Pi Beginner Learning.
Reference: DWM22090803
The Raspberry Pi 3 Model B is based on the 64-bit quad-core Broadcom BCM2837 ARMv8 core with a processor clock of 1.2 GHz and is therefore up to ten times more powerful than a first-generation Raspberry Pi with wireless LAN and Bluetooth connectivity.
Reference: DWM23041901
The PI-232 RS232 HAT is a Serial communication HAT designed for use with the Rapsberry Pi A+/B+/2/3/4 (Also works with Zero/ZeroW, but it is HAT size)
Reference: DWM22101301
D5W 76-108MHz 500mW FM radio Transmitter-2000m long distance FM transmitter with digital display.
BPI-R3 Router board with MediaTek MT7986(Filogic 830) quad core ARM A53 + MT7531A chip design ,2G DDR RAM ,8G eMMC flash onboard, it is a very high-performance open-source router development board, support Wi-Fi 6/6E 2.4G Wi-Fi use MT7975N and 5G Wi-Fi use MT7975P, support 2 SFP 2.5GbE port, and 5 GbE network port.
