All best sellers
  • On sale!
  • DWM-RAK7243 Pilot Gateway Pro Kit with Cellular & GPS modules
  • DWM-RAK7243 Pilot Gateway Pro Kit with Cellular & GPS modules
  • DWM-RAK7243 Pilot Gateway Pro Kit with Cellular & GPS modules

DWM-RAK7243 Pilot LoRa Gateway Pro Kit with GPS modules


DWM-RAK7243 Pilot LoRas Gateway Pro Kit with GPS modules for PoC Raspberry Pi 3B+, RAK2245 Pi HAT.

Center frequency

Volume discounts

Quantity Unit discount You Save
2 $1.00 Up to $2.00
4 $2.00 Up to $8.00
10 $5.00 Up to $50.00


Product Description

The RAK7243 Pilot Gateway Pro is a device that consists of Raspberry Pi 3B+, RAK2245 Pi HAT which includes a GPS module and a Heat Sink for better performance and thermal heat dissipation management, and a optional RAK2013Cellular Pi HAT. And it’s housing is built with an aluminum casing. For the build-in RAK2245 Pi HAT, it uses the SX1301 chip from Semtech which built-in LoRa concentrator IP core is a powerful digital signal processing engine. It is able to receive up to 8 LoRa packets simultaneously sent with different spreading factors on different channels and available in multiple variants so it can be used for internartinal standard bands. This unique capability allows to implement innovative network architectures advantageous over other short range systems. For the build-in RAK2013 Cellular Pi HAT, it supports optional QUECTEL BG96 / EG91 / EG95 which can supports NB-IOT / CAT-M / CAT1 LTE / CAT4 LTE. It follows Raspberry Pi specifications and is easy to mount with Raspberry Pi and RAK2245 Pi HAT module. Pilot Gateway Pro is ideal for prototyping, proof-of-concept demonstration or for the evaluation. It includes a ready to use LoRaWan Gateway OS that can be connected to a LoRaWan server. Also it is developer friendly and simple even for no-so-techy users to set up LoRaWan system. It has to be the best value and function for connectivity to address a variety of applications like Smart Grid, Intelligent Farm and other IoT enterprise applications.

Main Features


Computing with Raspberry Pi 3B+(Linux). 
SX1301 base band processor, emulates 49 x LoRa demodulators 10 programmable parallel demodulation paths, support 8 uplinks channel, 1 downlink channel. 
Support optional Cellular module(Quectel BG96 or EG91 or EG95) for NB-IOT /CAT-M / CAT1 LTE / CAT4 LTE. 
Built-in the Ublox MAX-7Q GPS Module. 
Built-in Heat Sink for thermal heat dissipation management. 
Supports 5V/2.5A power supply.
TX power up to 27dBm, RX sensitivity down to -139dBm@SF12, BW 125KHz. 
LoRa frequency supports global license-free frequency band (EU433, CN470, EU868, US915, AS923, AU915, KR920, IN865 and AS920).  Housing with top cover, body, bottom cover with riveted motherboard standoff. 
Includes Pi ready 'ID EEPROM', GPIO setup and device tree can be automatically configured from vendor information. 
Supports fully open source code connected to a LoRaWAN server.


Useful Link:




Product Details
100 Items

Write your review

RFM50-S 433MHz /868MHz /915MHz HopeRF 20dBm Soc Transceiver RF module

RFM50-S 433MHz /868MHz /915MHz HopeRF 20dBm Soc Transceiver RF module

RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.

Write your review
You might also like
16 other products in the same category:

Reference: DWM22021102

Heltec Helium HNT Miner 915MHz SAW bandpass filter

Review(s): 0

Heltec Helium HNT Miner 915MHz SAW bandpass filter 1dB bandwidth 26MHz, cut-off characteristics of steep. For 915MHz remote control, the performance of the RF receiver is optimized to effectively filter out-of-band signals, reduce noise and increase dynamic range.

Price $26.00
In stock

Follow us on Facebook