Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Raspberry Pi 3 Model B+ boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT.
The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market.
The Raspberry Pi 3 Model B+ maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B.
Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
1GB LPDDR2 SDRAM
2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
Extended 40-pin GPIO header
Full-size HDMI
4 USB 2.0 ports
CSI camera port for connecting a Raspberry Pi camera
DSI display port for connecting a Raspberry Pi touchscreen display
4-pole stereo output and composite video port
Micro SD port for loading your operating system and storing data
5V/2.5A DC power input
Power-over-Ethernet (PoE) support (requires separate PoE HAT)
Reference: DWM16092702
The Lora/GPS_HAT is an expension module for LoRaWan for using with the Raspberry Pi.This product is intended for those interested in developing LoRaWAN solutions which is based on the SX1276/SX1278 transceiver.
Reference: DWM22082512
The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random channels which is fully compatible with RPi3B/3B+/4.
Reference: DWM22090901
Raspberry Pi 4 Model B Broadcom BCM2711 2GB, 4GB or 8GB LPDDR4-3200 SDRAM available dual-band 2.4/5.0 GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capability.
Reference: DWM22051402
Raspberry Pi cluster board a standard size mini-ITX board to be put in a case with up to 6 RPI CM4 Compute Modules.
Reference: DWM22101001
HDMI to CSI-2 Adapter Board built by TC358743XBG is an HDMI to CSI-2 camera port adapter designed for Raspberry Pi with up to 1080p@30fps support.all versions of Raspberry Pi series boards are supported.
Reference: DWM22083001
SI4732-Radio-ESP32-2.8 inch TFT Touchscreen-Arduino Si4732 chip all Band Radio DSP Receiver FM LW SSB 2.8 inch Big Touch Screen PAM8406 HiFi Headphone Amp.
Reference: DWM18021501
37 sensor modules In 1 Sensor Kits great package for Arduino Raspberry Pi Beginner Learning.
Reference: DWM22090803
The Raspberry Pi 3 Model B is based on the 64-bit quad-core Broadcom BCM2837 ARMv8 core with a processor clock of 1.2 GHz and is therefore up to ten times more powerful than a first-generation Raspberry Pi with wireless LAN and Bluetooth connectivity.
Reference: DWM22072501
LILYGO 3.71 inch ink screen with touch can be used as a Raspberry Pi expands the module, and the corresponding pin-out interface is designed to adapt to the Raspberry Pi.
Reference: DWM22101302
433MHz 8W amplifier Board is high Efficiency for data transmission, flight control, extended range RF power amplification.
Reference: DWM23041902
ArduPico is An Arduino-style Carrier board which compatible Raspberry Pi Pico/Pico H/Pico W/Pico WH.
Reference: DWM23041901
The PI-232 RS232 HAT is a Serial communication HAT designed for use with the Rapsberry Pi A+/B+/2/3/4 (Also works with Zero/ZeroW, but it is HAT size)
Reference: DWM24012302
The SunFounder Raspberry Pi Pico W Ultimate Starter Kit offers a rich IoT learning experience for beginners aged 8+. With 450+ components,117projects, and expert-led video lessons, this kit makes learning microcontroller programming and IoT engaging and accessible.
Reference: DWM22091205
CM4 Raspberry pi Computer module 4 without wireless check out the full range of Compute Modules 4.
Reference: DWM22072502
The T-PicoC3 ESP32-C3 RP2040 Wireless WIFI Module is a Dual MCUs board Equipped with Raspberry Pi RP2040 and ESP32-C3 chip Support learning library TensorFlow, via TensorFlow Lite With 1.14in ST7789V IPS high definition LCD.
Reference: DWM22090901
Raspberry Pi 4 Model B Broadcom BCM2711 2GB, 4GB or 8GB LPDDR4-3200 SDRAM available dual-band 2.4/5.0 GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capability.
Reference: DWM22051402
Raspberry Pi cluster board a standard size mini-ITX board to be put in a case with up to 6 RPI CM4 Compute Modules.
Reference: DWM22091001
CM4 Raspberry pi Computer module 4 with wireless check out the full range of Compute Modules 4.
Reference: DWM22123001
The Raspberry Pi 4 Model B is the best single-board computer to develop your IoT project, and start your first gateway for NB-IoT/Cat-M and LoRaWAN with the RAK Pi HAT.
Reference: DWM22091101
BPI-R3 Router board with MediaTek MT7986(Filogic 830) quad core ARM A53 + MT7531A chip design ,2G DDR RAM ,8G eMMC flash onboard, it is a very high-performance open-source router development board, support Wi-Fi 6/6E 2.4G Wi-Fi use MT7975N and 5G Wi-Fi use MT7975P, support 2 SFP 2.5GbE port, and 5 GbE network port.
Raspberry Pi 3 Model B+ boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT.
