All best sellers
NB-IoT Bee Arduino NB-IoT Shield Board
  • NB-IoT Bee Arduino NB-IoT Shield Board
  • NB-IoT Bee Arduino NB-IoT Shield Board
  • NB-IoT Bee Arduino NB-IoT Shield Board

NB-IoT Bee Arduino NB-IoT Shield Board


NB-IoT Bee is an expansion board for Arduino to add NB-IoT technology. user can study/evaluate and do POC for NB-IoT solution rapidly.


Volume discounts

Quantity Unit discount You Save
2 $0.50 Up to $1.00
4 $0.60 Up to $2.40
10 $0.80 Up to $8.00
20 $1.20 Up to $24.00
50 $2.00 Up to $100.00

**NarrowBand-Internet of Things (NB-IoT) **is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage. Battery life of more than 10 years can be supported for a wide range of use cases.
New physical layer signals and channels are designed to meet the demanding requirement of extended coverage – rural and deep indoors – and ultra-low device complexity. Initial cost of the NB-IoT modules is expected to be comparable to GSM/GPRS. The underlying technology is however much simpler than today’s GSM/GPRS and its cost is expected to decrease rapidly as demand increases.
**Arduino** is an open-source electronics platform based on easy-to-use hardware and software, it is an easy tool for fast prototyping, aimed at students without a background in electronics and programming. As soon as it reached a wider community, the Arduino board started changing to adapt to new needs and challenges, differentiating its offer from simple 8-bit boards to products for IoT applications, wearable, 3D printing, and embedded environments. All Arduino boards are completely open-source, empowering users to build them independently and eventually adapt them to their particular needs. The software, too, is open-source, and it is growing through the contributions of users worldwide.
**NB-IoT Bee** is the core module for NB-IoT Shield, With NB-IoT Shield and Arduino, user can study/evaluate and do POC for NB-IoT solution rapidly. 
**The NB-IoT Bee** is loaded with offshore NB-IoT module. include:
**Nb-IoT Bee QB05, QB08, QB20**, they use Quectel BC95 module. The module is designed for only use in NB-IoT network. and difference suffix reference to different NB-IoT Band.
**Nb-IoT Bee QG96**, it uses Quectel BG96 module. This module supports mutli-bands. Except NB-IoT, It also support LTE Cat M1 & EGPRS.


-  Heading textSupport different NB-IoT Bands, can use world widely
-  Low power consumption
-  Wide area coverage
-  AT command to controlAuto support 3.3v or 5v Arduino board


 Smart metering (electricity, gas and water)
-  Facility management services
-  Intruder and fire alarms for homes & commercial properties
-  Connected personal appliances measuring health parameters
-  Tracking of persons, animals or objects
-  Smart city infrastructure such as street lamps or dustbins
-  Connected industrial appliances such as welding machines or air compressors


-  Output Power: 23dBm
-  Sensitivity : -129dBm
-  Operation Temperature: -40°C ~ +85°C
-  Input Vcc: 4.5v ~ 5.5v
-  Micro SIM Interface

Package Includes:

- 1 x NB-IoT Bee
- 1 x NB-IoT Antenna

**Order Info:**

 NB-IoT Bee-QB05:  load with Quectel BC95-B5 ,for B5:850Mhz
 NB-IoT Bee-QB08:  load with Quectel BC95-B5, for B8:900Mhz
 NB-IoT Bee-QB20:  load with Quectel BC95-B5, for B20:800Mhz
 NB-IoT Bee-QG96:  load with Quectel BG96, Support LTE Cat M1 & Cat NB1 & EGPRS, mutli-bands module 


Useful Link:


User Manual and Case Study

Product Details
97 Items

Write your review

RFM50-S 433MHz /868MHz /915MHz HopeRF 20dBm Soc Transceiver RF module

RFM50-S 433MHz /868MHz /915MHz HopeRF 20dBm Soc Transceiver RF module

RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.

Write your review
You might also like

Reference: DWM17032101

LoRa IoT Development Kit-V1

Review(s): 0

LoRa IoT Development Kit is designed to facilitate beginners and developers,The LoRa IoT kit will show how to build LoRa network, and how to use the network to send data from a LoRa sensor node to the cloud server.

Price $279.00
In stock
16 other products in the same category:

Reference: DWM20061502

Dragino LWL01 LoRaWAN Water Leak Sensor Node

Review(s): 0

The LWL01 is a LoRaWAN Water Leak Sensor. It detects the water leak status and will send periodically data every day as well as for water leak event. It also count the water leak event times and also calculate last water leak duration.

Price $25.00
In stock

Follow us on Facebook