Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Xilinx Platform USB Cable, DLC9G , JTAG programmer , FPGA/CPLD Download Cable.
Product Feather:
1. Automatic identification and adapt to the target I/O voltage, Vref compatible with 1.5V--5V
2. Adapt to download and debug all Xilinx CPLD/FPGA devices
3. Support JTAG, Slave Serial, SPI download mode.
4. Fully compatible with Xilinx Platform USB Cable II, and have been upgraded to the latest version firmware.
5. Support iMPACT and ChipScope.
6. LED status indicator indicating the target device power state.
7. The clock speed can automatic control when download the target device.
8. Supports the following operating system:
——MicrosoftWindows WIN7
——Microsoft Windows XP Professional
——Microsoft Windows Vista
——Red Hat Enterprise Linux
——SUSE Linux Enterprise
9. The list of supported devices:
- All Artix7/Vertex7/ZYQN7 Families
- All Virtex FPGA families
- All Spartan FPGA families
- XC9500 / XC9500XL / XC9500XV CPLDs
- CoolRunner XPLA3 / CoolRunner-II CPLDs
- XC18V00 ISP PROMs
- XCF00S / XCF00P Platform Flash PROMs
- XC4000 series FPGAs Programs serial peripheral interface (SPI) flash PROMs
Package List:
1. Xilinx Platform Cable USB Host *1
2. Xilinx adapter board*1
3. The high quality USB Cable *1
4. 2.54mm 14Pin JTAG Cable *1
5. 2.00mm 14Pin JTAG Cable *1
6. 2.54mm 10Pin JTAG Cable *1
7. 2.54mm Color DuPont Line *7
Reference: DWM16110102
Mini USB to RS485 / RS422 Converter FTDI CHIP converter adapter with Screw Terminals and photoelectric isolation.
Reference: DWM14072101
Logic8/16 USB 24/100M logic analyzer / perfect decoder logic analyzer.
Reference: DWM15080602
USBASP USBISP Downloader Programmer for 51 AVR,With power and program the two indicators,On-board over-current protection,Support 5V and 3.3V power supply to the target board.
Reference: DWM14032103
Mini USB to RS485 / RS422 Converter FTDI CHIP converter adapter with Screw Terminals and photoelectric isolation.
Reference: DWM14041801
CoLinkEx is a hardware debugging adapter which supports JTAG & SW debugging with ARM Cortex M devices in CooCox software and Keil RealView MDK.
Reference: DWM15110401
WaveShare ATMEL AVR Programmers & Debuggers USB AVR JTAGICE XPII Compatible Atmel JTAGICE mkII In-System Programmer and debuggers Supports AVR Studio 4/5/6.
Reference: DWM15110402
WaveShare ATMEL AVR Programmers USB AVRISP XPII Compatible AT AVR ISP mkII In-System Supports AVR Studio 4/5/6.
Xilinx Platform USB Cable, DLC9G , JTAG programmer , FPGA/CPLD Download Cable.
