All best sellers
DWM-RAK831 433MHz/ 868MHz/ 915MHz SX1301 LoRa/ LoRaWAN Gateway Module
  • DWM-RAK831 433MHz/ 868MHz/ 915MHz SX1301 LoRa/ LoRaWAN Gateway Module

DWM-RAK831 433MHz/ 868MHz/ 915MHz SX1301 LoRa/ LoRaWAN Gateway Module

DWM18011801

DWM-RAK83 433MHz/ 868MHz/ 915MHz SX1301 LoRa/ LoRaWAN Gateway Module combine a host system like Raspberry Pi or WisAP(OpenWRT based) or WisCam to help you realize the whole Lora system development.

Center frequency

Volume discounts

Quantity Unit discount You Save
2 $0.50 Up to $1.00
4 $1.00 Up to $4.00
6 $1.50 Up to $9.00
8 $2.00 Up to $16.00
10 $3.00 Up to $30.00
$135.00
Tax excluded
Quantity

Description

Introduction

The concentrator module RAK831 is targeted for a huge variety of applications like Smart Metering, IoT and M2M applications. It is a multi- channel high performance Transmitter/receiver module designed to receive several LoRa packets simultaneously using different spreading factors on multiple channels. The concentrator module RAK831 can be integrated into a gateway as a complete RF front end of this gateway. It provides the possibility to enable robust communication between a LoRa gateway and a huge amount of LoRa end-nodes spread over a wide range of distance. The RAK831 needs a host system for proper operation.

This is a ideal modular products to help you realize the whole Lora system development. With the USB-SPI converter module FT2232, you can quickly to make the software development in your PC. But also, you can integrate the concentrator module to your production product to realize the Lora gateway function.This is very economic way to address for a huge variety of applications like Smart Grid, Intelligent Farm,intelligent Farm and Other IoT applications.

The RAK831 needs a host system like Raspberry Pi or WisAP(OpenWRT based) or WisCam for proper operation . The host processor can be a PC or MCU that will be connected to RAK831 via USB or SPI RAK831 is able to receive up to 8 LoRa packets simultaneously sent with different spreading factors on different channels. This unique capability allows to implement innovative network architectures advantageous over other short range systems:

End-point nodes (e.g. sensor nodes) can change frequency with each transmission in a random pattern. This provides vast improvement of the system robustness in terms of interferer immunity and radio channel diversity.

Key Features

- Compact size 80.0 x 50.0 x 5.0mm
- LoRaTM modulation technology
- Frequency band 433,470, 868,915MHz
- Orthogonal spreading factors
- Sensitivity down to -142.5 dBm
- Maximum link budget162 dB
- SPI interface
- SX1301 base band processor
- Emulates 49 x LoRa demodulators
- 12 parallel demodulation paths
- 1 (G)FSK demodulator
- 2 x SX1257 Tx/Rx front-ends High frequence
- 2 x SX1255 Tx/Rx front-ends low frequence
- Supply voltage 5 V
- RF interface optimized to 50
- Output power level up to 23 dBm
- GPS receiver (optional)
- Range up to 15 km (Line of Sight)
- Range of several km in urban environment - Status LEDs
- HAL is available from
https://github.com/RAKWireless/RAK831_LoRaGateway

Parameter

Operating Votalge DC5V
Operating Temperature 40℃ to 85℃
Radio Chipset Sx1301
RF Output Power 23dBm
Input Signal Not more than 13dBm
Receiver Sensitivity Up to 142.5dBm(@293bps)
GPS Receiver Optional
SNR Handling 9dB
Control Interface SPI
Dimension 80x50x5mm
Firmware Gateway HAL
Range  Up to 15km
Frequency Band 433MHz/ 868MHz/915MHz


Applications

- Smart Metering
- Wireless Star Networks
-.Home-,Building-,Industrial automation
- Remote Control - Wireless Sensors
- M2M, IoT
- Wireless Alarm and Security Systems

UsefulLink

Download

Datasheet

3 D file

Hardware Design

 

Software Development

Application Notes

Certification Report

AD

Shopping-Shipping Agent service


 

 


 


Product Details
DWM18011801
0 Items
You might also like
16 other products in the same category:

Reviews

Write your review

DWM-RAK831 433MHz/ 868MHz/ 915MHz SX1301 LoRa/ LoRaWAN Gateway Module

DWM-RAK83 433MHz/ 868MHz/ 915MHz SX1301 LoRa/ LoRaWAN Gateway Module combine a host system like Raspberry Pi or WisAP(OpenWRT based) or WisCam to help you realize the whole Lora system development.

Write your review

Follow us on Facebook